Overview
The TUOWIN TW7502 is a silent oil-free air Compressor with a Power of 1500W, an exhaust capacity of 90L/min, an exhaust pressure of 0.8MPa, and a Rotation speed of 1450rpm. Equipped with a 50L gas tank, the operating noise is as low as 58 +/- 3dB (A), and a 220V/50HZ power supply, it is suitable for occasions where clean and quiet compressed air is required.
Features
1. Equipped with a safety valve, it has sensitive detection and constant overpressure unloading function to ensure safety, reliability and stability.
2. Adopt "Lifu" brand pressure switch to precisely adjust the pressure value range to meet high-frequency continuous action to ensure accuracy and Stability.
3. Adopt a pressure-regulated gas-water separator, which can adjust and stabilize the air pressure, and has an automatic gas-water separation device to effectively filtrate the moisture and impurities in the compressed air.
4. The gas storage tank is made of "Baosteel" rolled steel plate, and the inner and outer double-decked painting process is not easy to rusting.
5. Adopting stainless steel capacitor, using imported pressure film and international professional winding technology, the service life can reach more than 100,000 times, the shell is explosion-proof and durable, and it is equipped with multi-interface and repeability.
6. The overload protector with a new double-spring structure has high Sensitivity and can effectively protect the host from voltage instability and other faults.
Principle
The silent oil-free air Compressor reciprocates through a motor-driven piston to suck in and compress air. The compressed air penetrates moisture and impurities through a gas-water separator and is then stored in an air storage tank. The pressure switch controls the start and stop of the equipment according to the set pressure value. The safety valve automatically unloads to ensure safety when overpressure is exceeded. The overload protector cuts off the power to protect the equipment in abnormal circumstances.
Applications
Laboratory, Medical Equipment, Food Encasement, Electronic Manufacturing, lame plating, Pneumatic Tools, Small Production Line
Standards
The product information does not mention the specific national or industry standards it meets.
Steps
1. Place the equipment in a stable, well-ventilated position.
2. Connect the power supply (220V/50HZ).
3. Check and ensure that safety valves, pressure switches, and other components are in normal condition.
4. Turn on the power switch, the device starts and starts to compress the air.
5. Adjust to the required Operating Pressure through a regulated gas-water separator.
6. Connect pneumatic tools or equipment using compressed air.
7. After use, turn off the power switch and empty the residual air and condensate in the gas tank.
Notice
• Please ensure that the device is used at Rated voltage (220V/50HZ).
Equipment should be placed in a smooth, drying and well ventilated environment.
• Regularly check and drain the condensate in the gas-water separator and gas storage tank.
Do not use it under conditions exceeding the rated pressure (0.8MPa).
• Pay attention to the noise level of the equipment during operation to ensure that it meets the requirements of the Operating Environment.
• Regularly check whether safety components such as safety valves and pressure switches are working properly.
• Before equipment maintenance, be sure to cut off the power supply and drain the pressure in the system.