Overview
The TUOWIN TW5504 is a silent oil-free air Compressor with a Rated power of 2200W, an exhaust capacity of 120L/min, and a maximum Operating Pressure of 0.8MPa. The equipment is designed without oil, and the operating noise is as low as 63 +/- 3dB (A). Equipped with a 120L large-capacity gas storage tank, it is suitable for a variety of occasions that require a stable and clean gas source.
Features
1. Equipped with a safety valve, it has sensitive detection and constant overpressure unloading function to ensure equipment safety, energy saving and environmental protection.
2. Adopt "Lifu" brand pressure switch, which can accurately adjust the pressure range to meet the requirements of no-load, load, shutdown and high-frequency continuous action of the equipment, ensuring accurate and stable.
3. Built-in pressure-regulating air-water separator, which can adjust and stabilize the air pressure, and has an automatic air-water separation device to effectively filtrate the moisture and impurities in the compressed air. The joints and pressure gauges are made of stainless steel, which is anti-rust and anti-corrosion.
4. The gas storage tank is made of "Baosteel" rolled steel plate, and the inner and outer double-decked painting process is not easy to rusting.
5. The stainless steel capacitor assembled by imported pressure film and international professional winding technology has a lifespan of more than 100,000 times. The shell is made of metal stainless steel, which is explosion-proof and durable. It is equipped with multiple interfaces and can be used for repeability.
6. Equipped with a new type of overload protector with double spring structure, Sensitivity is high, which can effectively protect the host from voltage instability and other faults.
Principle
The silent oil-free air Compressor reciprocates by driving the piston through the motor to suck in and compress the air. The compressed air passes through the gas-water separator to remove moisture and impurities, and then enters the air storage tank for storage. The pressure switch controls the start and stop of the equipment according to the set pressure value. When the pressure reaches the upper limit, it stops when the pressure is lower than the lower limit. The safety valve automatically opens to relieve pressure when the system pressure rises abnormally, and the overload protector cuts off the power supply when the current is abnormal, so as to jointly ensure the safe and stable operation of the equipment.
Applications
Laboratory, Medical Equipment, Food Encasement, Electronic Manufacturing, lame plating, Pneumatic Tools, Small Production Line
Standards
The product information does not mention the specific national or industry standards it meets.
Steps
1. Place the equipment in a stable, well-ventilated position.
Connect the power supply and ensure that the voltage is 220V/50Hz.
3. Check and ensure that all valves and connections are tight.
4. Turn on the power switch, and the device will automatically start and start compressing the air.
5. Adjust the output air pressure to the required value through the pressure regulating valve (on the gas-water separator).
6. After use, turn off the power switch and open the drain valve at the bottom of the gas tank to discharge the condensate.
Notice
• Please make sure the equipment is well grounded and works at Rated voltage (220V/50Hz).
When the equipment is running, do not touch high-temperature components (e.g. cylinders, exhaust pipes).
• Regularly check and drain the condensate in the gas storage tank.
Do not use in flammable, explosive or corrosive gas environments.
• Non-professional personnel should not disassemble or modify the safety devices of the equipment (such as safety valves, pressure switches, overload protectors).
• Before moving or maintaining equipment, be sure to cut off the power supply and release all pressure in the gas tank.