Overview
TUOWIN TW7504 is a silent oil-free air Compressor with a power of 3000W, an exhaust capacity of 180L/min, and an exhaust pressure of 0.8MPa. The equipment adopts a silent design with a noise value of 65 +/- 3dB (A) and a 120L gas storage tank, which is suitable for occasions where a stable and clean air source is required.
Features
1. Equipped with a safety valve, it has sensitive detection and constant overpressure unloading function to ensure energy saving, environmental protection, safety and effectiveness.
2. Adopt "Lifu" brand pressure switch, which can accurately adjust the pressure value range to meet the equipment's no-load, load, shutdown, and high-frequency continuous actions to ensure accuracy and Stability.
3. Adopt a pressure-regulated gas-water separator, which can adjust the stable air pressure according to requirements, and has an automatic gas-water separation device to effectively filtrate the moisture and impurities in the compressed air. The joints and pressure gauges are made of stainless steel, which is hard, rust-proof and corrosion-proof.
4. The material of the gas storage tank is made of "Baosteel" rolled steel plate, and the inner and outer double-decked painting process is not easy to rusting.
5. The stainless steel capacitor assembled by imported pressure film and international professional winding technology can last more than 100,000 times, the shell is made of metal stainless steel, explosion-proof and durable, equipped with multiple interfaces, and the repeability can be used many times.
6. The overload protector with a new double-spring structure has high Sensitivity and can play a good role in protecting the main engine from abnormal operation caused by voltage instability and other faults, ensuring that the whole machine is not damaged.
Principle
The silent oil-free air Compressor reciprocates by driving the piston through the motor to compress the air and send it to the air storage tank. The pressure switch controls the start and stop of the equipment according to the preset value to maintain the stability of the system pressure. The compressed air penetrates moisture and impurities through the gas-water separator, the safety valve automatically unloads when overpressure, and the overload protector cuts off the power supply in abnormal circumstances to jointly ensure the safe, stable and efficient operation of the equipment.
Applications
Laboratory, Medical Equipment, Food Encasement, Electronic Manufacturing, lame plating, Pneumatic Tools
Steps
1. Check the Appearance of the equipment and whether the connecting pipeline is in good condition.
2. Place the equipment in a stable and well-ventilated position.
3. Connect a 220V/50Hz power supply that meets the specifications.
4. Set the output pressure through a pressure-regulated gas-water separator as required.
5. Open the outlet valve and start the equipment.
6. Observe the pressure gauge, and the device will automatically operate (load/unload/stop) according to the pressure switch settings.
7. After use, turn off the power supply of the equipment and empty the compressed air in the gas storage tank and pipeline.
Notice
• Please ensure that the equipment is well grounded and use a power supply that meets the specifications.
Equipment should be placed in a well-ventilated environment away from heat sources and flammable and explosive materials.
• Regularly check and drain the condensate in the gas-water separator and gas storage tank.
Do not use it under conditions exceeding the rated pressure (0.8MPa).
• Non-professional personnel should not disassemble or adjust safety components such as safety valves and pressure switches.
• When the equipment is running, do not touch high-temperature components such as motors and cylinders.
• Regularly check whether the connection parts are tight and whether the pipeline is leaking.
• If the overload protector action occurs, the cause of the fault should be investigated and solved before restarting the device.
