Overview
The TUOWIN TW5501-9L is a silent oil-free air Compressor with 550W Power, 30L/min displacement and a maximum exhaust pressure of 0.8MPa. The model uses a 9L gas tank, the operating noise is as low as 54 +/- 3dB (A), the design is compact, the Net weight is 21.5KG, and it is suitable for 220V/50HZ power supply environment.
Features
1. Equipped with a safety valve, it has a sensitive detection and constant overpressure unloading function to ensure safety, reliability and stability.
2. Adopt "Lifu" brand pressure switch, which can accurately adjust the pressure value range to meet the needs of high-frequency continuous action of the equipment.
3. Equipped with a pressure-regulated gas-water separator, including an automatic gas-water separation device, which can effectively filtrate moisture and impurities in the compressed air.
4. The gas storage tank adopts "Baosteel" rolled steel plate, double-decked painting process inside and outside, which is not easy to rusting.
5. Using stainless steel capacitor, the shell is explosion-proof and durable, and the service life can reach more than 100,000 times.
6. Equipped with a new double spring leaf structure overload protector, Sensitivity is high, can effectively protect the host.
Principle
The air Compressor reciprocates by driving the piston through the motor, sucking in and compressing the air. The compressed air enters the air storage tank for storage and filtrates moisture and impurities through the air-water separator. The pressure switch controls the start and stop of the Compressor to maintain the system pressure within the set range. The safety valve automatically unloads when the system overpresses to ensure safe operation.
Applications
Laboratories, Dental Clinics, Cosmetic Instruments, Food Encasement, Small Pneumatic Tools, Model Making, Lame plating Equipment, Instruments
Standards
The product did not mention specific compliance standards.
Steps
1. Place the air Compressor in a stable and well ventilated position.
2. Connect the power supply (220V/50HZ).
3. Open the drain valve at the bottom of the gas storage tank to drain any condensate that may exist.
4. Set the output pressure through the pressure regulator as required.
5. Start the equipment and observe whether the pressure gauge and operating status are normal.
6. After use, turn off the power supply and open the drain valve again to empty the compressed air and condensate in the air storage tank.
Notice
• Please ensure that the equipment is placed in a stable, ventilated and safe environment from flammable and explosive materials.
• Before use, please check whether the Power supply voltage meets the 220V/50HZ requirements.
• Regularly (recommended after daily use) open the drain valve of the air storage tank to discharge the condensate.
• Do not exceed the maximum Operating Pressure (0.8MPa) of the equipment calibration.
• When the equipment is running, do not touch high-temperature components such as motors and cylinders.
• If abnormal noise, vibration or air leakage is found, it should be stopped immediately for inspection.
• Non-professionals should not disassemble or repair the internal parts of the equipment by themselves.
• When not in use for a long time, the power supply should be cut off, the gas storage tank should be emptied, and stored in a drying place.
