Overview
HUXI HR-2L Laboratory Vacuum emulsification Reaction Kettle is a device for laboratory environments that enables the dispersion, emulsification, homogenization, mixing and other processes of materials under vacuum or pressure conditions. It is equipped with a variety of Stirrer, High Shear Homogeneous Mulser, Vacuum Sealing System and Temperature Control System, supports a variety of sensing inspections, can simulate industrial production, Processing capacity can be selected from 1L or 2L series.
Features
1. Dispersion, emulsification, homogenization, mixing process in vacuum or pressure environment
2. Equipped with Macro High Viscosity Stirrer and High Shear Homogeneous Mulser
3. Reliable vacuum sealing system and temperature control system
4. Measuring temperature, pressure, viscosity, pH, etc
5. Support heating or chilling down function, Operating temperature up to 170 ℃
6. Glass kettle can observe the reaction process, or use stainless steel pressurized high temperature homogeneous emulsification dispersion
7. Suitable for a variety of industries, such as cosmetics, lithium batteries, polymer coalescence, etc
Principle
The equipment handles materials through stirring, homogenization, emulsification, dispersion, mixing and other processes under vacuum or pressure conditions. Using anchor-type spiral belt scraping wall stirring slurry and homogenizing working head, efficient reaction is achieved within a specific speed range (stirring 0-230rpm, homogeneous 10000-30000rpm), and the vacuum system can reach -0.097 to -0.02mpa to ensure process Stability.
Applications
Cosmetics industry, lithium battery industry, polymer coalescence reaction, liquid and polymer ground dispersion solids and fibers, glue strong vacuum stirring
Steps
1. Check the power connection to ensure that it is 220V 50/60HZ.
2. Add materials according to Processing capacity (allowable stirring amount 500ml, emulsification amount 1000-2000ml)
3. Set stirring speed (0-230rpm) and homogenizing speed (10000-30000rpm)
4. Start the vacuum system and adjust the Vacuum Level to -0.097---0.02MPa
5. Set temperature control as required, maximum Operating temperature 170 ℃
6. Glass kettle to observe the reaction process, or use stainless steel pressurization function
7. Monitor material temperature, pressure, viscosity, pH and other parameters
8. After completing the reaction, turn off the equipment and clean it
Notice
- Permissible Ambient Temperature 5-40 ℃, relative humidity 80%, beyond the range may affect equipment performance
- Processing viscosity does not exceed 10000mpas to avoid overload operation
- Ensure material contact materials (SS316L, Borosilicate Glass, FKM10) are compatible to prevent corrosion
- Travel of the lifting bracket is 210mm, pay attention to the safety range when operating
- Regularly check the vacuum sealing system and stirring components to ensure no leakage and abrasion
- Under vacuum or pressure conditions, strictly adhere to operating specifications to prevent accidents
