Overview
This three-blade Impeller is a stainless steel stirring element, with a blade width of 70mm, a blade height of 1.5mm, a rod diameter of 6mm, and a rod length of 300mm. It can be used at medium and high speeds to make the mixed medium flow axially from top to bottom, generating local shear force.
Features
1. Stainless steel, corrosion resistant and durable
2. Medium and high-speed use, with a wide range of applications
3. Generates axial flow from top to bottom, with good mixing effect
4, local shear force, suitable for a variety of media stirring
Principle
The three-blade Impeller makes the mixing medium form axial flow from top to bottom while generating local shear force, and realizes effective mixing effect through this flow mode.
Applications
Suitable for various liquid mixing occasions that require medium and high speed stirring
Steps
1. Choose the right mixing container
2. Install the Impeller on the mixing equipment
3. Adjust Impeller Position to Proper Depth
4. Start the equipment and adjust to the required Rotation speed
5. Perform the mixing operation
6. Turn off the equipment and clean it after completion
Notice
• Check Impeller for nondestructive condition before use
• Make sure the Impeller is securely installed
• Rotation speed according to medium viscosity
• Avoid overload operation
• Clean and maintain in time after use
• Pay attention to operation safety and avoid contact with the Impeller in operation
