Overview
This screw Impeller is a slow speed Impeller, made of stainless steel, with a pulp diameter of 60mm, a rod diameter of 8mm, and a rod length of 350mm. It is often operated in a laminar flow area, where liquids rise or fall along the helical surface to form an axial up and down circulation, suitable for mixing and heat transfer of medium and high viscosity liquids.
Features
1, slow Impeller design, smooth operation; 2, stainless steel material, corrosion resistance and durability; 3, pulp diameter 60mm, rod diameter 8mm, rod length 350mm, accurate size; 4, suitable for medium and high viscosity liquids, mixing and heat transfer effect is good; 5, in the laminar flow area operation, the formation of axial up and down circulation, reduce turbulence.
Principle
When the screw type Impeller is operated at a slow speed, the liquid rises or falls along the helical surface, forming an axial up and down circulation flow, which promotes the mixing and heat transfer process of medium and high viscosity liquids.
Applications
Mixing and heat transfer process of medium and high viscosity liquids
Steps
1. Check whether the Impeller specifications meet the requirements; 2. Install the Impeller on the mixing equipment; 3. Set the slow operation mode; 4. Start the equipment and observe the liquid flow; 5. Adjust the speed or stop the operation as needed.
Notice
• Ensure that the Impeller material is compatible with the medium; • Avoid speeding during operation to prevent damage; • Regularly check Impeller abrasion; • Operate in laminar flow areas for optimum performance; • Follow equipment safety operating procedures.
