Overview
This screw Impeller is a slow speed Impeller made of stainless steel, with a pulp diameter of 70mm, a rod diameter of 8mm, and a rod length of 350mm. The Impeller is often operated in a laminar flow area, where the liquid rises or falls along the helical surface to form an axial up and down circulation, suitable for mixing and heat transfer of medium and high viscosity liquids.
Features
1. Slow Impeller Design
2. Made of stainless steel
3. Suitable for medium and high viscosity liquids
4. Operate in the laminar flow region to form an axial up-down cycle
5. Suitable for mixing and heat transfer processes
Principle
When the screw type Impeller operates in the laminar flow region, the liquid rises or falls along the helical surface, forming an axial up and down circulation flow, thus realizing the mixing and heat transfer process of medium and high viscosity liquids.
Applications
Mixing and heat transfer process of medium and high viscosity liquids
Steps
1. Select the appropriate Impeller model according to the mixing needs
2. Check whether the Impeller specifications meet the requirements
3. Install Impeller to Mixing Equipment
4, set the appropriate stirring speed
5. Start the mixing operation
6. Monitor the mixing process
7. Turn off the equipment after stirring
Notice
• Make sure the Impeller specifications match the equipment
• When using, it should be operated in the laminar flow area
• Suitable for medium and high viscosity liquids
• Pay attention to the control of stirring speed
• Regularly check Impeller status
• Avoid overloading
