Overview
This screw Impeller is a slow-speed Impeller made of stainless steel, with a pulp diameter of 80mm, a rod diameter of 8mm, and a rod length of 350mm. It is often operated in a laminar flow area, where liquids rise or fall along the helical surface to form an axial up and down circulation, suitable for mixing and heat transfer of medium and high viscosity liquids.
Features
1. Slow speed Impeller, smooth operation; 2. Stainless steel material, corrosion resistance and durability; 3. Pulp diameter 80mm, rod diameter 8mm, rod length 350mm, accurate size; 4. Suitable for mixing and heat transfer process of medium and high viscosity liquids.
Principle
The screw type Impeller operates in the laminar flow region, causing the liquid to rise or fall through the helical surface to form an axial up and down circulation flow, achieving effective mixing and heat transfer of medium and high viscosity liquids.
Applications
Mixing and heat transfer process of medium and high viscosity liquids
Steps
1. Install the Impeller on the mixing equipment; 2. Adjust the Rotation speed to the slow range; 3. Start the equipment for stirring operation; 4. Adjust the operating parameters according to the viscosity of the medium.
Notice
• Only suitable for medium and high viscosity liquids; • Keep running slowly when operating; • Avoid using at high speed to prevent damage; • Check Impeller abrasion regularly; • Ensure that the equipment is firmly installed.
