Overview
The HUXI HMS-MG mini Magnetic Stirrer is a compact, portable experimental device mainly used for stirring or simultaneous heating of liquids or solid-liquid mixtures with low viscosity consistency. Its heating function can heat the sample according to the experimental needs to ensure that the mixing effect meets the experimental requirements.
Features
1. Mini and compact in appearance, easy to carry and easy to operate.
2. Small size, light weight, low noise, maintenance-free, smooth operation.
3. A variety of models are available to meet different experimental requirements.
4. The whole machine shell is made of ABS material, which has the characteristics of heat resistance, low temperature resistance, corrosion resistance, no odor, and excellent insulation performance.
5. Adopt the knob key adjustment method, Rotation speed is adjustable, and with indicator light prompt.
6. The working plate uses ultra-white tempered Glass technology, which has excellent bearing capacity, resistance and strength, and the performance of rapid cooling and rapid heating is 2 to 3 times higher than that of ordinary Glass, which has obvious effect on preventing hot cracking.
Principle
The device generates a swirl/spin magnetic field through an internal brushless DC motor driving the magnet, which drives the magnetic stirrer placed in the container to synchronize the swirl/spin, so as to realize the stirring and mixing of the liquid. The heating model also heats the sample container on the working plate through the heating element.
Applications
Mainly used for stirring or simultaneous heating stirring low viscosity liquid or solid-liquid mixture of experimental occasions.
Steps
1. Place the device on a stable countertop and connect it to the power supply.
2. Place the container containing the sample and the appropriate size stirrer in the center of the working plate.
3. If heating is required, the heating function can be turned on and the temperature can be set.
4. swirl/spin speed knob, gradually adjust from low speed to the desired Rotation speed.
5. Observe the stirring state, and fine-tune the Rotation speed through the knob to achieve the best mixing effect.
6. After use, first adjust the Rotation speed to the lowest level, then turn off the power and remove the container.
Notice
• Please ensure that the equipment is used at Permissible Ambient Temperature (5~ 40 ° C) and relative humidity (≤ 80%).
• Before use, check whether the Power supply voltage meets the equipment requirements (100~ 240V, 50/60Hz).
• Do not exceed Max. stirring Capacity (2L).
• The size of the stirrer is recommended to be selected within the range of 20-35mm.
• When the equipment is working, do not touch the swirl/spin parts or the high temperature work plate surface with your hands.
Before cleaning the equipment, be sure to disconnect the power supply and avoid liquids from entering the equipment.
• Please use a container suitable for the material of the working plate (Tempered Glass) to avoid local overheating or impact.
• If not in use for a long time, please disconnect the power supply and store it properly.
