Overview
HUXI HR-500DG/12G High Shear Homogeneous Mulser is a handheld experimental equipment that is agile and convenient. Good motor selection, stable operation, low noise, long-term continuous operation, equipped with a variety of working heads and support vacuum operation, easily meet the high requirements of dispersion, emulsification and homogenization experiments.
Features
1. Select a good motor for stable operation, lower noise, and safe and reliable design
2. All parts of the working head in contact with the material are made of good stainless steel, with good corrosion resistance
3. The working head adopts coupling to connect with the drive motor, which is easy and flexible to disassemble and assemble
4. The speed control base adopts stepless governor, which is convenient for speed regulation and stable operation
5. Handheld operation, support vacuum operation, a variety of working heads are available
6. Can operate continuously for a long time to meet high-demand experiments
Principle
Through the high-speed swirling/spinning of the working head, strong shear force, Impact force and centrifugal force are generated, so that the material can achieve emulsification, homogenization and dispersion in a short time.
Applications
Dispersion, emulsification, homogenization
Steps
Step 1 Install the right working head
2. Connect the power supply and turn on the device.
3. Rotation speed adjusted by stepless governor
4. Immerse the working head into the material for processing
5. Turn off the power and clean the equipment after use
Notice
• The contact part of the working head is made of stainless steel, and the corrosion resistance needs to be checked regularly
• Ambient Temperature should not exceed 40 ℃, relative humidity ≤ 80%
• When disassembling and assembling the working head, it needs to be operated according to the coupling connection method
• Use stepless governor during speed regulation to ensure stable operation
• Pay attention to the temperature change of the equipment when running continuously for a long time
• The viscosity of the treated material should not exceed 1000MPa · s
• The operating temperature shall not exceed 120 ° C
