Overview
HUXI HR-500DG/28G High Shear Homogeneous Mulser is a smart and convenient handheld operating device. With a good motor, stable operation, low noise, long-term continuous operation, a variety of working head options and support for vacuum operation, it can easily meet a variety of high-demand dispersion, emulsification and homogenization experimental needs.
Features
1. Select a good motor for stable operation, lower noise, and safe and reliable design
2. All parts of the working head in contact with the material are made of good stainless steel, with good corrosion resistance
3. The working head adopts coupling to connect with the drive motor, which is easy and flexible to disassemble and assemble
4. The speed control base adopts stepless governor, which is convenient for speed regulation and stable operation
Principle
The equipment generates high shear force through a high-speed swirl/spin working head to achieve dispersion, emulsification and homogenization of materials. Rotation speed is controlled by a stepless governor, and the working head is adjustable in the range of 2000~ 23000rpm, and the homogenization emulsification process is completed through mechanical shearing.
Applications
Dispersion, emulsification, homogenization
Steps
Step 1 Install the right working head
Step 2 Connect the power supply
3. Rotation speed required
4. Set the timing time
5. Start the device to operate
6. Turn off the power and clean the equipment after use
Notice
• The part where the working head contacts the material needs to be checked and maintained regularly
Equipment Operating Ambient Temperature Should Not Exceed 40 ℃
• environment relative humidity should be controlled below 80%
• Make sure the working head is firmly installed before use
• Note that the maximum processing viscosity of the equipment is 6000mpa · s
• Pay attention to safety protection during operation
