Overview
PUSHEN SZQ-250um Single Sided Film Applicator can be applied to Spreader with a film thickness of 250μm. The prepative material is stainless steel to ensure that the coating applicator is not eroded by acidic or alkaline substances in Coatings or cleaning agents, and the film is uniform.
Features
1. Single-sided Film Applicators are made of hard stainless steel and can be applied to a flat and solid substrate with a film of a specific thickness and width.
2. Each Film Applicator comes with 1 or 4 High Accuracy fixed film thicknesses to ensure Accuracy, and a variety of film widths are available for customization.
Principle
The coating applicator provides a uniform Spreader effect, ensuring that the thickness of the test sample is controlled accurately, uniformly and comparably. The leveling of Coating refers to the smooth and smooth state of the film after Coating application, and the leveling surface does not have irregular forms such as orange peel, brush marks, ripples, cratering, etc.
Applications
Coatings, inks, pigments, powders
Steps
1. Apply a film of a specific thickness and width using the Applicator on a flat and firm substrate.
2. Ensure that the Spreader is uniform to obtain comparable test samples.
Notice
• Test samples need to be uniform, comparable, and have accurate thickness control.
• Coating leveling your mileage may vary and be subjective. It is recommended to compare it in parallel with the standard sample.
