Overview
The CHNSPEC G60 Pro single-angle Glossiness Meter is a Portable Gloss measuring instrument with 60 ° standard Measurement Angles, equipped with a 23 * 7mm test diameter, and a Measurement range of 0~ 1200GU. The instrument has an Automatic calibration function, Measurement time is less than 1 second, and is equipped with a full-color display. It supports USB and Bluetooth data transmission. It can continuously measure up to 15,000 times on a single charge. It is suitable for fast and accurate Glossiness detection in a variety of scenarios.
Features
1. Measurement Angles are 60 ° standard angle, and the test diameter is 23 * 7mm.
2. Measurement range is wide, up to 0~ 1200GU.
3. Automatic calibration function, easy to operate.
4. Measurement speed is fast, and the single Measurement time is less than 1 second.
5. Strong battery life, a single charge can be continuously measured about 15,000 times.
6. Equipped with a 1.14-inch full-color display, the display is clear.
7. Support USB and Bluetooth dual Interface for easy data transmission.
8. The body is small and light, the weight is only 116g, and the size is 84 * 70 * 17mm.
Principle
The CHNSPEC G60 Pro Glossiness Meter works based on the principle of specular reflection of light. The instrument emits a beam of light at a 60 ° incidence to the surface of the sample under test, and then receives and measures the intensity of the reflected light in the direction of specular reflection (i.e. a symmetrical 60 ° angle). The Glossiness value (GU) of the sample surface is calculated by comparing the measured intensity of the reflected light with that of a standard plate under the same conditions.
Applications
Coatings, inks, plastics, ceramics, paper, metals, Stone, wood, automobiles, decorative materials
Standards
ISO 2813、ASTM D523、ASTM D2457、GB/T 9754、GB/T 9966、JG/T 25
Steps
1. Turn it on and ensure that the instrument has sufficient power.
2. Align the instrument measurement port with the calibrated standard plate for Automatic calibration.
3. Close the instrument measurement port to the surface of the sample to be tested.
4. Press the measurement button, the instrument will complete the measurement and display the result in less than 1 second.
5. The measurement data can be transferred to a computer or mobile device for recording and analysis through a USB data cable or Bluetooth connection.
Notice
* Please make sure that the instrument has been calibrated through the standard plate before use.
* During measurement, the measurement port of the instrument should be tightly and smoothly fitted to the surface of the tested sample to avoid light leakage affecting the results.
* Do not use in environments exceeding the specified Operating temperature (0-40 ℃) or High Humidity (relative humidity ≥ 85%) and condensation.
* Please keep it properly and clean the calibrated standard board regularly to avoid scratches or contamination on its surface.
The instrument is not waterproof, please avoid contact with liquids.
When not in use for a long time, it is recommended to charge the instrument regularly to maintain the battery.
