Overview
HONGKE LHP-100 Constant Temperature and Humidity Incubator is a professional microcomputer controlled environment simulation equipment with accurate temperature and Humidity Control system. It provides various constant temperature and humidity environments required for industrial research and biotechnology testing, and is suitable for many purposes such as microbial foster, tissue cell preservation, plant cultivation, preservation and testing of biological products and pharmaceuticals.
Features
1. Adopting professional microcomputer technology programmable control mode, it can set various parameters such as temperature, Humidity, time, etc., and can choose continuous or timed operation mode.
2. Intelligent thermostatic, constant humidity Control system, Fast Response, high accuracy of temperature and humidity control.
3. Using ultrasonic humidification, reliable humidification, Humidity uniform; Dehumidification mode, good performance, convenient and reliable.
4. Air duct type ventilating, the air speed of the studio is soft, and the temperature Humidity is uniform.
5. With ultra-temperature Sensor abnormal protection function, and an independent over-temperature protection device to ensure the safety of instruments and samples.
6. The four corners of the inner tank of the box are semi-circular arcs, and imported mirror or brushed stainless steel is used.
7. Microcomputer fully automatic control, touch switch, easy to operate.
Principle
The incubator precisely adjusts the internal heating, cooling, humidification and dehumidification modules through a microcomputer control system to achieve closed-loop control of the Ambient Temperature and Humidity in the box. The air duct circulation system is used to ensure uniform and stable temperature and Humidity in the working room, thus providing constant foster or storage conditions for the sample.
Applications
Bacteria, molds, microorganisms, antimicrobial, tissue cell fostering and preservation, plant cultivation, breeding tests, biological products, medicines, vaccines, blood and various specimens preservation and testing, commodity, parts of mass testing, other purposes of thermostatic, constant humidity test
Steps
1. Turn on the power supply (220V 50Hz).
2. Microcomputer programming through Touchscreen, setting the required parameters such as temperature, Humidity and Working time.
3. Select Continuous Operating Mode or Timed Operating Mode.
4. Place the sample and start the device to run.
5. After the run, remove the sample and turn off the equipment.
Notice
Equipment should operate at Ambient Temperature of 10-35 ° C.
• Do not use outside the specified temperature (5-50 ° C) and Humidity (50% to 95% RH) range.
• Note that the maximum power consumption of the device is 350W, make sure the power supply matches.
• Make sure the liner and shelf are clean and intact before use.
The equipment has an over-temperature protection function, but it is still necessary to observe the running status when using it to ensure the safety of the sample.
• Regular maintenance to ensure the smooth flow of the air duct and the normal operation of the humidification/dehumidification system.
