Overview
The HONGKE LHP-250 Constant Temperature and Humidity Incubator is a 250L precision environment simulator. It uses professional microcomputer technology to provide accurate temperature and Humidity control, suitable for biotechnology research, microbial foster, specimen preservation and product mass inspection, etc., where a variety of applications require constant temperature Humidity conditions.
Features
1. Adopt professional microcomputer technology, programmable control, can set temperature, Humidity, time and other parameters, support continuous or timed Operating Mode.
2. Intelligent constant temperature and humidity Control system, Fast Response, High accuracy of temperature and humidity control.
3. Using ultrasonic humidification, reliable humidification, Humidity uniform; Dehumidification mode, good performance.
4. Air duct type ventilating design, the air speed of the studio is soft, and the temperature and Humidity are uniform.
5. With ultra-temperature Sensor abnormal protection function, and equipped with an independent over-temperature protection device to ensure the safety of instruments and samples.
6. The four corners of the inner tank of the box are semi-circular arcs, made of imported mirror or brushed stainless steel.
7. Touch switch operation, easy to use.
Principle
The incubator precisely adjusts the internal heating, cooling, humidification and dehumidification modules through a microcomputer Control system. Ultrasonic technology is used for humidification, and the air in the working room flows evenly through the domestic circulation air duct system, so as to achieve rapid Response and stable Temperature Humidity environment control to meet the set parameter requirements.
Applications
Bacteria, mold, microorganisms, antimicrobial, tissue cell fostering and preservation, plant cultivation, breeding test, biological products, products, vaccines, blood and various specimens preservation and testing, commodity, parts of mass testing, other purposes of thermostatic, constant humidity test
Steps
1. Turn on the power supply (220V 50Hz).
2. Perform parameter settings through Touchscreen, including Temperature, Humidity, Working time (1~ 9999 minutes) and Operating Mode (Continuous or Timed).
3. Place the sample on the shelf.
4. Start the equipment, the microcomputer system will automatically control the operation to achieve and maintain the set constant temperature and humidity environment.
5. After the work is completed, remove the sample and turn off the power.
Notice
Equipment should operate at an Ambient Temperature of 10-35 ° C.
• Do not use in flammable, explosive, corrosion environment.
• When placing the sample, do not block the internal air duct to ensure uniform heat preservation Humidity.
• Clean the liner regularly to maintain hygiene.
The equipment has an over-temperature protection function, but it is still necessary to observe the operating status when using it.
• Non-professional personnel should not disassemble or repair the equipment.
