Overview
CHP-80 (Water-jacketed) Co2 incubator is a precision instrument for cell, tissue and bacterial fostering under the HONGKE brand. It uses Water-jacketed heating and microcomputer module control to provide a stable foster environment for microbiology, agricultural science, medical research, tissue cell fostering, bacterial fostering, genetic engineering and immunology.
Features
1. Microcomputer module control, high control accuracy, digital display temperature and CO2 concentration.
2. With CO2 concentration sound and light alarm device.
3. Equipped with CO2 and gas dual filtrating device.
4. Water-jacketed heating, effective insulation compartment, stable temperature control and power saving.
5. Equipped with a door heating device to prevent condensation and contamination of the Glass door for easy observation.
6. The incubator water jacket is made of stainless steel argon arc welding, which is durable; the four corners of the liner are semicircular arcs, which is easy to clean.
Principle
The incubator precisely adjusts the temperature and carbon dioxide concentration in the box through a microcomputer Control system. The Water-jacketed heating system provides a uniform and stable thermal environment, while the natural evaporation method maintains the Humidity in the box. Carbon dioxide gas enters the box through the intake system, and the concentration is monitored by the Sensor. Control system maintains the set value to create an ideal gas environment for the foster.
Applications
Microbial research, agricultural scientific research, medical research, various tissue and cell fostering, bacterial fostering, genetic engineering, immunology
Steps
1. Place the device in a stable position that meets the operating Ambient Temperature (+ 5~ 35 ° C) and connect it to a 220V 50Hz power supply.
2. Add an appropriate amount of distillation water to the water jacket.
3. Turn on the power switch and set the required temperature (room temperature + 5~ 60 ° C) and CO2 concentration (0~ 20%) through the microcomputer control panel.
4. After the temperature and CO2 concentration in the box reach and stabilize at the set value, put in the foster.
5. Close the box door, the equipment enters the automatic operation state, and maintains the setting environment.
6. After use, take out the foster, turn off the power, and clean.
Notice
Equipment should be placed in a well-ventilated place without direct sunlight and with an Ambient Temperature between + 5 and 35 ° C.
• Must use a 220V 50Hz power supply and ensure good grounding.
• When adding water to the water jacket, distillation water should be used to prevent scale.
• The door opening operation should be quick to reduce the fluctuation of the environment in the box.
• Pay attention to the CO2 concentration alarm prompt to ensure that the gas supply is normal.
• Clean the liner regularly, keep it hygienic, and disconnect the power when cleaning.
• If not used for a long time, please empty the water in the water jacket and store the equipment in the drying place.
