Overview
HUXI HX-20TS heating type thermostatic mixing bath uses DC brushless motor and microcomputer control technology, combined with PI heating thermostatic and oscillation functions to significantly shorten the experimental time and improve work efficiency. It is an ideal automation tool for reaction processes such as sample hatching, catalysis, mixing and preservation.
Features
1. The operation is simple and convenient, and the large display screen clearly displays the time and parameters
2. Dynamic icon display, user-friendly design
3. Programmable multi-stage temperature control, up to 5 temperature points, with automatic fault detection and buzzer alarm
4. Temperature deviation calibrated and short oscillation point dynamic function
5. Transparent thermal insulation cover is made of high temperature PC environmentally friendly material, integrated anti-loss design, multiple Safety protection, in line with CE standards
6. Built-in over-temperature protection device, automatically run according to the original setting after power failure recovery
7. Microprocessor control, temperature control linear, Rotation speed accurate, small fluctuation
8. Timing function 0~ 99h59min adjustable, optional USB or host computer communication
Principle
The instrument is driven by a brushless DC motor, combined with microcomputer control technology implementation of precise temperature regulation and oscillation motion. PI heating thermostatic technology ensures temperature stability, integrates heating and oscillation functions, and automates the sample reaction process.
Applications
Sample incubation, catalysis, mixing, preservation
Standards
CE safety standard
Steps
1. Connect the power supply and turn it on.
2. Set temperature, time and Rotation speed parameters through Touchscreen
3. Select or replace the corresponding module (such as the standard 35 * 2.0ml centrifuge tube module)
4. Start the operation, and the instrument automatically executes the setting procedure
5. When the operation ends or malfunctions, the instrument alarm prompts
Notice
• Check whether the Power supply voltage matches 100-240V/50-60HZ before use
• Make sure the module is installed correctly to avoid loss or damage
• Pay attention to the range -10~ 100 ℃ when setting the temperature, and the control range RT + 5~ 100 ℃
• Rotation speed setting does not exceed 1800rpm, specific modules such as L, M, N up to 600rpm
• Do not open the thermal insulation cover at will during operation to prevent temperature fluctuations
• Regularly calibrate temperature to ensure accuracy ≤ +/- 0.5 ° C
• In case of power failure, the instrument will run automatically after recovery without manual restart
• When the USB interface is optional, connect the computer control according to the instructions
