Overview
SK/MIC-600-CO-Y/40000 online carbon monoxide detector is a fixed installation gas concentration monitoring equipment of SKYEAGLEE brand. The product adopts Modular design, intelligent Sensor detection technology and overall explosion-proof (d) structure, standard configuration with dot matrix LCD liquid crystal display, supports three-wire system 4~ 20mA analog and RS485 digital signal output, and can provide customized modules such as programmable switch output according to user request, which is convenient for system networking and maintenance.
Features
1. Modular design, intelligent Sensor detection technology, the whole is flameproof (d) structure.
2. With automatic temperature compensation, zero point and full scale drift compensation function.
3. Impact protection against high concentration gases.
4. Support full software calibrate, users can calibrate by themselves through 3 buttons, easy to operate.
5. Support 2-wire 4-20mA output.
Principle
The detector adopts the Sensor of electrochemistry principle to continuously monitor carbon monoxide (CO) gas in the environment through Sampling methods such as diffusion type, pipeline type, flow type or pump type. The Sensor converts the gas concentration signal into an electrical signal, and after processing, it can display the concentration value in real time through the LCD display.
Applications
Paints room, incinerator, scientific research, production workshop, company, environment monitoring, school scientific research, building construction, fire alarm, sewage treatment, industrial gas process control, petroleum and petrochemical, chemical plant, smelter, steel plant, coal plant, thermal power plant, boiler room, waste treatment plant, tunnel construction, oil pipeline, gas station, underground gas pipeline maintenance, indoor air mass detection, safety protection equipment monitoring in dangerous places, etc.
Steps
1. Wire the equipment according to the electrical wiring definition diagram.
2. Connect DC12~ 30V Power Supply.
3. After the device is powered on, enter the menu through three buttons to set parameters and calibrate.
4. According to actual needs, set parameters such as alarm points.
5. The equipment starts to work normally, monitoring and displaying gas concentration in real time.
Notice
• Please select according to the actual working conditions, the information is for reference only.
• Working ambient temperature range is -20 ℃~ + 50 ℃, Humidity is 10% RH~ 90% RH without condensation.
• Absolute pressure should be within the range of 106KPa +/- 20KPa.
• It is recommended to choose a single three-core Shielding cable with a diameter of ≥ 1.5mm for connecting cables.
The maximum connection distance should be ≤ 1000 meters.
• Sensors have a lifespan of approximately 2 years and require regular maintenance and calibrating.
• Equipment Protection Rating is IP66, and it is necessary to ensure that the corresponding protection requirements are met during installation.
