Please contact customer service
Imported catalytic combustion Sensor, Response Time ≤ 10 seconds, accuracy ≤ +/- 3% F.S. With pump-suction three-speed sampling, 200,000 data storage, 3.5-inch TFT color screen display and automatic cleaning gas circuit functions, support temperature and pressure compensation.
Category : Gas Detector
Brand : Skyeaglee
SKU : NB037060
Service :The delivery and service By NBCLab.Com
SK/MIC-800-EX-Y/100% Portable Combustible Gas detector is a Handheld Gas detection device under the SKYEAGLEE brand. The instrument uses EFM ultra-low power consumption 32-bit ARM processor and imported catalytic combustion Sensor, combined with High Accuracy low temperature drift amplifier and stable power supply processing circuit to ensure fast detection, accurate measurement, stability and Repeatability. The instrument is equipped with a 3.5-inch full-color TFT screen, supports Chinese and English graphical menu operation, and has a user-friendly interface.
1. Imported High Accuracy Catalytic combustion Sensor. 2. Use High Accuracy Low Temperature Drift Amplifier and Stable Power Processing Circuit. 3. Equipped with a 3.5-inch full-color TFT screen, supports Chinese and English graphical menus, and provides real-time detection trend analysis charts. 4. With Data storage function, it can store 200,000 sets of data, and the storage interval is adjustable. 5. Provide USB interface for high-speed data transmission, and print data can be downloaded. 6. Built-in long-life imported micro sampling pump, adjust the cleaning gas path through the gear. 7. Meet the explosion-proof qualification certification, and the explosion-proof level is Exia II CT4. 8. Adopt two-color mold shell, with anti-skid, waterproof, dustproof and explosion-proof characteristics. 9. With self-calibration, zero-point calibration, multi-point calibration function. 10. With temperature and pressure compensation function. 11. With one-click factory reset function. 12. Gas concentration units can be quickly switched between LEL and% LEL. 13. With self-programming function, alarm parameters, STEL and TWA function parameters can be set. 14. Provide two detection modes: normal detection and patrol. 15. The detection gas circuit has an automatic cleaning function, which can automatically prompt instrument failure, Sensor calibration expiration and failure.
The detector uses a pump-suction detection method, and actively extracts environmental gas samples through a built-in micro-sampling pump. After the gas sample enters the instrument, it contacts the imported catalytic combustion Sensor inside. The Sensor works based on the principle of catalytic combustion: when flameless combustion occurs on the catalytic element on the surface of the Sensor, it will cause the component resistance change. After the change is processed by the High Accuracy low temperature drift amplifier and the stable power supply processing circuit, it is calculated by the 32-bit ARM processor and converted into the corresponding gas concentration value, which is finally displayed on the screen. The instrument has temperature and pressure compensation functions to ensure measurement accuracy in different environments.
Petrochemicals, gas transmission and distribution, fire emergency, environment monitoring, confined space operation, industrial safety
ExiaⅡCT4
1. Turn on and warm up for about 30 seconds. 2. Select the detection mode (usually detection mode or patrol mode) as needed. 3. Set alarm parameters and STEL/TWA parameters (if required) through the menu. 4. Extend the sampling tube into the area to be measured, and the instrument passes the built-in pump suction sampling. 5. Observe the real-time concentration, MAX Maximum, STEL, TWA and other information displayed on the screen. 6. The stored data can be downloaded by connecting to the computer through the USB interface. 7. After use, the cleaning air path can be adjusted through the gear.
* Do not use under conditions exceeding the Operating Ambient Temperature (-30~ 50 ° C) and Humidity (10~ 95% RH without condensation). * Explosion-proof level of the instrument is Exia II CT4, please use it in the specified explosion-proof area. * Regularly zero calibration and Sensor calibration to ensure measurement accuracy. * Note that the Sensor has a lifespan of about 3 years and needs to be replaced when it expires. Avoid strong impact or immersion of the instrument in liquids. * Please store in an environment of -30~ 70 ° C. Please read the instructions before use and follow the relevant safety operating procedures.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
