Overview
SKYEAGLEE SK/MIC-800-O3-Y/150 Portable Ozone Detector is a Handheld Gas detection device that uses the pump-suction Sampling method to detect the concentration of ozone (O3) gas in the environment. The instrument is equipped with imported High Accuracy Electrochemical sensors, combined with professional circuit design and data processing technology to ensure fast detection, accurate measurement and stable performance.
Features
1. Imported High Accuracy Electrochemical sensor to ensure measurement accuracy.
2. Use High Accuracy Low Temperature Drift Amplifier and Stable Power Processing Circuit to Ensure Long-term Stability.
3. Equipped with a 3.5-inch TFT full-color display, it supports Chinese and English graphical menu operations and provides real-time detection trend analysis charts.
4. With Data storage function, it can store up to 300,000 sets of data, and the storage interval is adjustable.
5. Built-in long-life imported micro sampling pump, providing low, medium and high adjustable gears, and with automatic cleaning gas circuit function.
6. Passed the explosion-proof qualification certification, the explosion-proof level is Exia II CT4, and the shell is designed with a two-color mold that is non-slip, waterproof, dustproof and explosion-proof.
7. Supports USB interface for high-speed data transmission, allowing you to download and print data.
8, with self-calibration, zero calibration, multi-point calibration function, and with temperature and pressure compensation.
9. Provide two detection modes of normal detection and patrol police, and support self-programming to set alarm parameters, STEL and TWA functions.
Principle
The detector uses a pump-suction Sampling method, which actively sucks environment gases into the inside of the instrument through a built-in micro-sampling pump. The gas is in contact with the built-in imported electrochemistry ozone Sensor, which generates an electrical signal proportional to the ozone concentration. After the signal is amplified by a High Accuracy, Low Temperature Drift amplifier and a stable power circuit, it is analyzed and calculated by a 32-bit ARM processor. Finally, the ozone concentration value is displayed on the screen in real time, and can be alarmed and recorded according to the settings.
Applications
Environment monitoring, industrial safety, confined space operation, sewage treatment, Food processing, Medical and health, Laboratory research
Standards
Explosion-proof standard: Exia ⅱ CT4
Steps
1. Boot warm-up: Press the power button for a long time to turn it on, and the instrument will warm up for about 30 seconds.
2. Select detection mode: Select "normal detection mode" or "patrol mode" through the menu.
3, set the sampling pump gear: according to the detection needs, select low, medium or high Sampling flow rate.
4. Detection: The sampling tube is inserted into the area to be measured, and the instrument will display the ozone concentration in real time.
5. Data viewing and export: You can view historical data through the menu, or connect to a computer through the USB interface to export data.
6. Shutdown: After the detection is completed, press the power button for a long time to shut down.
Notice
• Do not use under conditions exceeding the Operating Ambient Temperature (-30~ 50 ° C) and Humidity (10~ 95% RH without condensation).
• Avoid strong impacts or drops to prevent damage to internal Sensors and circuits.
• Regularly zero calibration and Sensor calibrating to ensure detection accuracy.
• The instrument has an automatic fault prompt function, and the fault prompt should be dealt with in time.
• When using in explosion-proof areas, it is necessary to strictly abide by relevant explosion-proof safety regulations.
• The sampling tube should be kept clean and open to avoid clogging affecting the test results.
• The instrument has a built-in rechargeable battery, please use the matching charger to charge.
• When not in use for a long time, it is recommended to store in a drying environment.
