Overview
The BANTE DDS-12D is a laboratory Conductivity Meter for measuring the conductivity of various liquids. The instrument features automatic temperature compensation and Adjustment to ensure measurement accuracy and ease of operation.
Features
1. 1 to 3 point calibrated automatic identification standard solution
2. Automatic temperature compensation to ensure accurate measurement of the full range
3. Automatic end point locking, maintaining stable readings for easy browsing and recording
4. The setting menu can customize the number of calibrating points, Electrode constant, temperature compensation coefficient, temperature unit, etc
5. One-click reset, automatically restore the meter to the factory default settings
Principle
The instrument detects the conductivity of the liquid through the Conductivity detector Electrode, and combines the temperature sensor for automatic temperature compensation to ensure the measurement accuracy under different temperature conditions. The automatic end point locking technology is used to stabilize the reading for easy recording and analysis.
Applications
Laboratory, water quality monitoring, industrial process control
Steps
1. Connect Conductivity detector Electrode and Power Adapter
2. Power on and select Measurement mode
3. Set the number of calibrating points, Electrode constant and other parameters as needed
4. Conductivity detector for 1 to 3 point calibrating
5. Electrode immersed in the liquid to be tested, the instrument automatically measurement and display the results
6. Automatic locking after stable reading for easy recording
Notice
• Make sure Electrode is clean and free of contamination before use
• Conductivity detector fluid specified when calibrating
• Electrode should be completely immersed in liquid during measurement
• Avoid use in environments beyond the Operating temperature range (0~ 50 ° C)
• Check Electrode status regularly and replace if necessary
• Electrode drying during storage
