Overview
HUXI RWD50E/20030042 LED overhead Stirrer is a laboratory equipment suitable for mixing medium and high viscosity liquids. The product is capable of high load, long-term continuous operation, outstanding performance, and automatic overload and abnormal protection to ensure laboratory safety.
Features
1, LED display, Rotation speed can be coarse and fine adjustment, the instrument operation, can also adjust the Rotation speed.
2. The motor starts softly and runs smoothly, effectively preventing sample overflow.
3. The closed enclosure effectively prevents liquid from splashing into the instrument, ensuring the safe operation of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the installation position of the stirring rod.
5. Impellers and brackets are available.
Principle
The Stirrer mixes liquids by means of a motor that drives the Impeller swirl/spin. The motor uses soft start technology for smooth operation. The enclosed housing design prevents the splashing of liquids. The user can adapt to different containers by adjusting the position of the stirring rod in the penetrating hole without changing the height of the main unit.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. Select the appropriate Impeller according to the viscosity of the liquid to be stirred and install it.
2. Adjust the stirring rod to the appropriate height through the Impeller penetration hole.
3. Turn on the power supply.
4. Rotation speed is coarse and fine-tuned through the LED screen and knob, and the required Rotation speed is set.
5. Start the equipment to start stirring, and the Rotation speed can be adjusted as needed during operation.
Notice
Do not use under conditions exceeding the Permissible Ambient Temperature (5~ 40 ° C) or relative humidity (80%).
● Power supply voltage range (100-240VAC) and rated Frequency (50/60HZ).
● Impeller clamping diameter should be within the allowable range of the drill chuck (0.5~ 10mm).
The device has overload and abnormal protection functions (sound prompt, automatic stop), please pay attention to the prompt tone when running.
● Use non-slip mats to ensure that the equipment is firmly placed.
Processing capacity is 20L, the maximum applicable viscosity is 10000mPa · s, do not exceed the limit.
● Impeller fixation requires matching wrench chuck.
● A variety of Impellers can be selected to meet different application requirements.
