Overview
HUXI RWD50E/20030043 LED overhead Stirrer is a laboratory equipment suitable for mixing medium and high viscosity liquids. This product is capable of high load, long-term continuous operation, outstanding performance, and automatic overload and abnormal protection functions to ensure laboratory safety.
Features
1. LED screen display, Rotation speed can be coarse and fine-tuned, and Rotation speed can also be adjusted during the operation of the instrument.
2. Motor soft start, smooth operation, effectively prevent sample overflow.
3. The closed enclosure effectively prevents liquid from splashing into the instrument, ensuring the safe operation of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the installation position of the stirring rod.
5. Provide a variety of Impellers and brackets to choose from.
Principle
The device mixes medium to high viscosity liquids by driving the Impeller swirl/spin motor. Its motor has a soft start function to ensure smooth operation and safe operation through a closed housing and automatic protection mechanism.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating IP42
Steps
1. Choose the right Impeller according to your needs.
2. Install the stirring rod through the Impeller penetration hole and adjust it to the appropriate position.
3. Use a wrench chuck to secure the Impeller.
4. Turn on the power, through the LED screen and knob Rotation speed coarse and fine adjustment.
5. Start the equipment, and adjust the Rotation speed as needed during operation.
Notice
● Please ensure that it is used at Permissible Ambient Temperature (5~ 40 ℃) and relative humidity (≤ 80%).
● Note Power supply voltage range is 100-240VAC, rated Frequency is 50/60HZ.
● The device has overload and abnormal protection functions. When triggered, it will issue a sound prompt and automatically stop. Please check the cause in time.
● Use non-slip pads to ensure stable placement of the equipment.
● Impeller clamping diameter range is 0.5~ 10mm, do not use beyond the range.
● The maximum processing capacity of this product is 20L, and the maximum applicable viscosity is 10000mPa · s. Please do not use it beyond the limit.
