Overview
HUXI LED Top-mounted Stirrer (model: RWD50E/20030040) is a laboratory equipment suitable for mixing medium and high viscosity liquids. It adopts an top-mounted design, which is capable of high load, long-term continuous work, and has automatic protection function for overload and abnormal conditions to ensure experimental safety.
Features
1. LED display, Rotation speed can be coarse and fine-tuned, and Rotation speed can also be adjusted during the operation of the instrument.
2. The motor starts softly and runs smoothly, effectively preventing sample overflow.
3. The closed enclosure effectively prevents liquid from splashing into the instrument, ensuring the safe operation of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the position of the stirring rod.
5. Provide a variety of Impellers and brackets to choose from.
Principle
The device mixes liquids by driving the Impeller swirl/spin motor. The motor has a soft start function, which allows for smooth acceleration and prevents sample splashing. Its closed housing and automatic protection mechanism work together to ensure the safe operation of the device under long-term and high-load work.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. Select the appropriate Impeller according to the characteristics of the liquid to be stirred.
2. Install the stirring rod through the Impeller penetration hole and adjust it to the appropriate position.
3. Use the wrench chuck to fix the Impeller.
4. Turn on the power supply and set the required Rotation speed through the LED screen and speed control knob.
5. Start the equipment to stir.
Notice
● Please ensure that the Ambient Temperature is used within the range of 5~ 40 ° C and the relative humidity ≤ 80%.
● Power supply voltage is within 100-240VAC range before use.
● Impeller clamping diameter range is 0.5~ 10mm, do not use beyond the range.
The device is equipped with overload and abnormal protection functions. If you hear a sound prompt and stop automatically, please check the load.
Pay attention to the non-slip pad at the bottom of the device to ensure a smooth placement.
● The maximum Processing capacity of this product is 20L, which is suitable for liquids with viscosity not exceeding 10000mPa · s.