Overview
HUXI LED overhead Stirrer (model: RWD50E/20030086) is a laboratory equipment suitable for mixing medium and high viscosity liquids. The product is capable of high load, long continuous operation, outstanding performance, and automatic protection for overload and abnormal conditions to ensure laboratory safety.
Features
1. LED display, Rotation speed can be coarse and fine-tuned, and Rotation speed can also be adjusted during the operation of the instrument.
2. The motor starts softly and runs smoothly, effectively preventing sample overflow.
3. The closed enclosure effectively prevents liquid from splashing into the instrument, ensuring the safe operation of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the installation position of the stirring rod.
5. Provide a variety of Impellers and brackets to choose from.
Principle
The device is driven by the motor Impeller swirl/spin to mix medium and high viscosity liquids. The motor uses soft start technology for smooth operation. The instrument has an automatic protection function for overload and abnormal conditions. It is safe by sound prompt and automatically stops running.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. Select the appropriate Impeller according to the experimental requirements and install it.
2. Adjust the stirring rod to the appropriate height through the Impeller penetration hole.
3. Turn on the power supply.
4. Rotation speed coarse or fine adjustment setting through LED screen and knob.
5. Start the equipment for stirring, and the Rotation speed can be adjusted as needed during operation.
Notice
• Please make sure to use it at the allowable Ambient Temperature (5~ 40 ° C) and relative humidity (≤ 80%).
• Before use, please confirm that the Power supply voltage (100-240VAC) matches the local power grid.
• Impeller installation needs to be firm, and the clamping diameter should be within the range of 0.5~ 10mm.
• The device has an overload protection function. If it triggers an automatic stop and is accompanied by a sound prompt, please check the load.
• Note that the maximum Processing capacity of the equipment is 20L and the maximum viscosity is 10000mPa · s. Please do not use it beyond the limit.
• The instrument housing is a closed design, but care needs to be taken to prevent large amounts of liquid from splashing in.
• Do not place heavy objects on the instrument or block the heat dissipation holes.
• Be sure to disconnect the power supply before cleaning.
