Overview
HUXI RWD50E/20030089 LED overhead Stirrer is a laboratory equipment suitable for mixing medium and high viscosity liquids. It adopts an overhead design, which is capable of high load, long-term continuous work, and has automatic overload and abnormal protection functions to ensure laboratory safety.
Features
1. LED display, Rotation speed can be coarse and fine-tuned, and Rotation speed can also be adjusted during the operation of the instrument.
2. The motor starts softly and runs smoothly, effectively preventing sample overflow.
3. The closed enclosure effectively prevents liquid from splashing into the instrument, ensuring the safe operation of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the installation position of the stirring rod.
5. Provide a variety of Impellers and brackets to choose from.
Principle
The Stirrer uses a motor to drive the Impeller swirl/spin to mix liquids. Its motor has a soft start function to ensure smooth operation. With a stepless speed regulation system, users can precisely adjust the Impeller's Rotation speed to suit different viscosity liquids according to experimental needs.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. Select the appropriate Impeller according to the experimental requirements and install it.
2. Adjust the stirring rod to the appropriate height through the Impeller penetration hole.
3. Turn on the power supply.
4. Rotation speed coarse or fine adjustment setting through LED screen and knob.
5. Start the equipment and start stirring.
6. After the experiment, turn off the power, remove the Impeller, and clean it.
Notice
• Please make sure to use it at the allowable Ambient Temperature (5~ 40 ° C) and relative humidity (≤ 80%).
• Before use, please confirm that the Power supply voltage (100-240VAC) matches the local power grid.
• Impeller installation needs to be firm to prevent peeling during operation.
• Do not touch the swirl/spin parts when the device is running.
• In case of overload or abnormality, the device will issue a sound prompt and automatically stop. Please check the cause before using it.
• Keep the equipment housing closed to prevent liquids from splashing inside.
• When cleaning, please disconnect the power supply and wipe with a dry cloth.
