Overview
HUXI RWD50E/20030088 LED overhead Stirrer is a laboratory equipment suitable for mixing medium and high viscosity liquids. It adopts an overhead design, which is capable of high load, long-term continuous work, and has automatic overload and abnormal protection functions to ensure experimental safety.
Features
1. Rotation speed can be coarse and fine-tuned, and can also be adjusted during operation.
2. Motor soft start, smooth operation, effectively prevent sample overflow.
3. The closed shell effectively prevents liquid from splashing in, ensuring the safety of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the height of the instrument, just adjust the installation position of the stirring rod.
5. Provide a variety of Impellers and brackets to choose from.
Principle
The machine drives the Impeller swirl/spin to mix medium and high viscosity liquids. The motor has a soft start function to ensure smooth operation, and the stirring speed is precisely controlled by stepless speed regulation to adapt to the mixing needs of liquids of different viscosity.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating IP42
Steps
1. Select the appropriate Impeller according to the experimental requirements.
2. Install the stirring rod through the Impeller penetration hole and adjust it to the appropriate position.
3. Use a wrench chuck to secure the Impeller.
4. Turn on the power supply and adjust the Rotation speed coarsely or finely through the LED screen and knob.
5. Start the equipment and start stirring.
6. After the experiment, turn off the power, remove the Impeller, and clean it.
Notice
Do not use under conditions exceeding the Permissible Ambient Temperature (5~ 40 ° C) or relative humidity (80%).
● Power supply voltage in 100-240VAC range.
● Impeller clamping diameter range is 0.5~ 10mm, do not use beyond the range.
The device has an overload protection function. If you hear a sound prompt and stop automatically, please check the load.
Please pay attention to safety when using to prevent liquids from splashing into the instrument.
● Please select the appropriate Impeller and Rotation speed according to the liquid viscosity (maximum 10000mPa · s) and Processing capacity (maximum 20L).