Overview
HUXI RWD50E/20030002 LED top-mounted Stirrer is a laboratory equipment suitable for mixing medium and high viscosity liquids. It adopts an top-mounted design, which is capable of high load, long-term continuous work, and has automatic overload and abnormal protection functions to ensure experimental safety.
Features
1. Rotation speed can be coarse and fine-tuned, and can also be adjusted during operation.
2. Motor soft start, smooth operation, effectively prevent sample overflow.
3. The closed enclosure effectively prevents liquid from splashing into the instrument, ensuring the safe operation of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the position of the stirring rod.
5. Provide a variety of Impellers and brackets to choose from.
Principle
The device drives the Impeller swirl/spin motor to mix medium and high viscosity liquids. The motor has a soft start function, runs smoothly, and precisely controls the stirring speed through stepless speed regulation to adapt to the mixing needs of liquids of different viscosity.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. Select the appropriate Impeller according to the experimental requirements.
2. Install the stirring rod through the Impeller penetration hole and adjust it to the appropriate position.
3. Use a wrench chuck to secure the Impeller.
4. Turn on the power supply and set the required Rotation speed through the LED screen and speed control knob.
5. Start the equipment to stir.
6. After the experiment, turn off the power, remove and clean the Impeller.
Notice
● Please ensure that it is used at Permissible Ambient Temperature (5~ 40 ℃) and relative humidity (≤ 80%).
● Note Power supply voltage range is 100-240VAC, rated Frequency is 50/60HZ.
● Impeller clamping diameter range is 0.5~ 10mm, do not use beyond the range.
The device is equipped with overload and abnormal protection functions. If you hear a sound prompt and stop automatically, please check the load.
Please use the non-slip pad at the bottom of the device to ensure stable operation.
Processing capacity is up to 20L, the maximum applicable liquid viscosity is 10000mPa · s, do not exceed the limit.
● When cleaning, please note that the Protection Rating is IP42 to avoid a large amount of liquid splashing into the inside of the instrument.
