Overview
HUXI RWD50E/20030065 LED overhead Stirrer is a laboratory equipment suitable for mixing medium and high viscosity liquids. It adopts an overhead design, which is capable of high load, long-term continuous work, and has automatic overload and abnormal protection functions to ensure experimental safety.
Features
1. LED screen display, Rotation speed can be coarse and fine-tuned, and Rotation speed can also be adjusted during operation.
2. Motor soft start, smooth operation, effectively prevent sample overflow.
3. The closed enclosure effectively prevents liquids from splashing into the instrument, ensuring the safety of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the position of the stirring rod.
5. Provide a variety of Impellers and brackets to choose from.
Principle
The device drives the Impeller swirl/spin to mix medium and high viscosity liquids in the container. The motor has a soft start function to ensure smooth operation. The instrument ensures the safety of the experimental process through a closed case and an automatic protection mechanism.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. Select the appropriate Impeller according to the experimental requirements.
2. Install the stirring rod through the Impeller penetration hole and adjust it to the appropriate position.
3. Use a wrench chuck to secure the Impeller.
4. Turn on the power supply and set the required Rotation speed through the LED screen and speed control knob.
5. Start the equipment and start stirring.
6. Rotation speed can be adjusted as needed during the experiment.
7. After the experiment, turn off the power and remove the Impeller for cleaning.
Notice
● Please ensure that the Ambient Temperature is used within the range of 5~ 40 ° C and the relative humidity ≤ 80%.
Please use a power supply with specifications of 100-240VAC and 50/60HZ.
● Impeller clamping diameter range is 0.5~ 10mm, do not use beyond the range.
The equipment is equipped with overload protection. When an audible prompt is issued and it automatically stops, please check the load condition.
● Note that the maximum processing capacity of the equipment is 20L, and the maximum applicable viscosity is 10000mPa · s.
Do not let liquids splash into the inside of the instrument.
Before cleaning and maintenance, be sure to disconnect the power supply.