Overview
HUXI LED Top-mounted Stirrer (model RWD50E/20030066) is a laboratory equipment suitable for mixing medium and high viscosity liquids. It adopts an top-mounted design, which is capable of high load, long-term continuous work, and has automatic protection for overload and abnormal conditions to ensure experimental safety.
Features
1. LED screen display, Rotation speed can be coarse and fine-tuned, and Rotation speed can also be adjusted during the operation of the instrument.
2. Motor soft start, smooth operation, effectively prevent sample overflow.
3. The closed enclosure effectively prevents liquid from splashing into the instrument, ensuring the safe operation of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the position of the stirring rod.
5. Provide a variety of Impellers and brackets to choose from.
Principle
The device mixes medium to high viscosity liquids by motor-driven Impeller swirl/spin. Its soft-start design ensures smooth operation and prevents splashes. The enclosed enclosure and automatic protection function work together to ensure the safety and stability of the device under long-term high-load operation.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating IP42
Steps
1. Select the appropriate Impeller according to the characteristics of the liquid to be mixed.
2. Install the stirring rod through the Impeller penetration hole and adjust it to the appropriate position without adjusting the overall height of the instrument.
3. Use a wrench chuck to secure the Impeller.
4. Turn on the power supply, and set the rough and fine adjustment of Rotation speed through the LED screen and knob.
5. Start the device, and the motor soft starts to work.
6. Rotation speed can be adjusted at any time as needed during operation.
Notice
● Please make sure to use it at the allowable Ambient Temperature (5~ 40 ℃) and relative humidity (≤ 80%).
● Note Power supply voltage range is 100-240VAC, rated Frequency is 50/60HZ.
Processing capacity is 20L, the maximum liquid viscosity is 10000mPa · s, do not exceed the limit.
● Drill chuck clamping diameter range is 0.5~ 10mm, please use the mixing rod in the specification.
The equipment is equipped with overload and abnormal protection functions (sound prompt and automatic stop), and should be checked in time when prompted.
● Use a non-slip pad to ensure that the equipment is firmly placed.
When working continuously for a long time, pay attention to the equipment status.