Overview
HUXI LED overhead Stirrer (model: RWD50E/20030068) is a laboratory equipment suitable for mixing medium and high viscosity liquids. The product is capable of high load, long-term continuous work, outstanding performance, and automatic protection for overload and abnormal conditions to ensure laboratory safety.
Features
1. LED screen display, Rotation speed can be coarse and fine-tuned, and Rotation speed can also be adjusted during the operation of the instrument.
2. Motor soft start, smooth operation, effectively prevent sample overflow.
3. The closed enclosure effectively prevents liquid from splashing into the instrument, ensuring the safe operation of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the installation position of the stirring rod.
5. Provide a variety of Impellers and brackets to choose from.
Principle
The machine drives the Impeller swirl/spin to mix medium and high viscosity liquids. Soft start technology is used to ensure smooth operation, and the stirring speed is precisely controlled by stepless speed regulation to adapt to different viscosity and mixing needs.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. According to the characteristics of the mixed medium, select the appropriate Impeller and install it.
2. Install the stirring rod through the penetration hole at the bottom of the instrument and adjust it to the appropriate height.
3. Turn on the power supply.
4. Rotation speed coarse adjustment and fine adjustment setting through LED screen and knob.
5. Start the equipment and start stirring.
6. Rotation speed can be adjusted at any time as needed during operation.
7. After the experiment, turn off the power, remove and clean the Impeller.
Notice
• Please make sure to use it at the allowable Ambient Temperature (5~ 40 ° C) and relative humidity (≤ 80%).
• Before use, please confirm that the Power supply voltage (100-240VAC) matches the local power grid.
• Impeller clamping diameter range is 0.5~ 10mm, please do not use beyond the range.
• The device has an overload protection function. When it sounds and stops automatically, please check the load.
• Pay attention to the non-slip pad at the bottom of the instrument to ensure that the equipment is placed smoothly.
• Do not let liquids splash into the inside of the instrument.
• Processing capacity is 20L, maximum applicable viscosity is 10000mPa · s, please do not exceed the limit.
