Overview
HUXI RWD50E/20030073 LED overhead Stirrer is a laboratory equipment suitable for mixing medium and high viscosity liquids. The product is capable of high load, long-term continuous operation, outstanding performance, and automatic overload and abnormal protection to ensure laboratory safety.
Features
1. LED screen display, Rotation speed can be coarse and fine-tuned, and Rotation speed can also be adjusted during the operation of the instrument.
2. Motor soft start, smooth operation, effectively prevent sample overflow.
3. The closed enclosure effectively prevents liquid from splashing into the instrument, ensuring the safe operation of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the installation position of the stirring rod.
5. Provide a variety of Impellers and brackets to choose from.
Principle
The Stirrer mixes medium to high viscosity liquids with a motor drive Impeller swirl/spin. Its motor has a soft start function for smooth operation and protection against sample splashing. The instrument has built-in automatic protection mechanisms for overloads and abnormal conditions, ensuring continuous operation of the equipment under safe conditions.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. Select the appropriate Impeller according to the characteristics of the liquid to be stirred.
2. Install the stirring rod through the Impeller penetration hole and adjust it to the appropriate position.
3. Use a wrench chuck to secure the Impeller.
4. Turn on the power supply and adjust the Rotation speed coarsely or finely through the LED screen and knob.
5. Start the equipment, and adjust the Rotation speed as needed during operation.
Notice
• Do not use under conditions exceeding the Permissible Ambient Temperature (5~ 40 ° C) or relative humidity (80%).
• Power supply voltage in 100-240VAC range.
• Pay attention to the diameter range of the drill chuck clamping (0.5~ 10mm), and do not use it beyond the limit.
• The equipment has overload protection. When it sounds and stops automatically, please check the load.
• Use non-slip mats to ensure that the equipment is firmly placed.
• The maximum viscosity of stirring should not exceed 10000mPa · s.
Processing capacity should not exceed 20L.
