Overview
HUXI LED overhead Stirrer (model: RWD50E/20030074) is a laboratory equipment suitable for mixing medium and high viscosity liquids. The product is capable of high load, long continuous operation, outstanding performance, and automatic protection for overload and abnormal conditions to ensure laboratory safety.
Features
1. LED display, Rotation speed can be coarse and fine-tuned, and Rotation speed can also be adjusted during the operation of the instrument.
2. The motor starts softly and runs smoothly, effectively preventing sample overflow.
3. The closed enclosure effectively prevents liquid from splashing into the instrument, ensuring the safe operation of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the installation position of the stirring rod.
5. Provide a variety of Impellers and brackets to choose from.
Principle
Impeller swirl/spin motor drives the device to mix liquids. Rotation speed can be adjusted precisely as needed with stepless speed regulation, and its soft start function ensures smooth operation. The enclosed enclosure and automatic protection mechanism together ensure the safety and stability of the equipment under long-term and high-load operation.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. According to the liquid viscosity and mixing requirements, select the appropriate Impeller and install it.
2. Adjust the installation position of the stirring rod through the Impeller penetration hole.
3. Turn on the power supply, and set the rough and fine adjustment of Rotation speed through the LED screen and control knob.
4. Start the equipment, and further fine-tune the Rotation speed as needed during operation.
5. After use, turn off the power supply and perform cleaning and maintenance.
Notice
● Please make sure to use it at the allowable Ambient Temperature (5~ 40 ℃) and relative humidity (≤ 80%).
● Power supply voltage range (100-240VAC) and rated Frequency (50/60HZ).
The device has overload and abnormal protection functions. When the protection is triggered (sound prompt, automatic stop), please check the load condition.
● Use non-slip pads to ensure stable placement of the equipment.
● Impeller clamping diameter range is 0.5~ 10mm, do not use beyond the range.
● Please use the equipment reasonably according to the Processing capacity (up to 20L) and the maximum viscosity of the liquid (10000mPa · s).
