Overview
HUXI RWD50E/20030076 LED overhead Stirrer is a laboratory equipment suitable for mixing medium and high viscosity liquids. It is capable of high load, long continuous operation, outstanding performance, and automatic overload and abnormal protection functions to ensure laboratory safety.
Features
1. LED display, Rotation speed can be coarse and fine-tuned, and Rotation speed can also be adjusted during the operation of the instrument.
2. The motor starts softly and runs smoothly, effectively preventing sample overflow.
3. The closed enclosure effectively prevents liquid from splashing into the instrument, ensuring the safe operation of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the installation position of the stirring rod.
5. Provide a variety of Impellers and brackets to choose from.
Principle
The device drives the stirring rod and the blade swirl/spin through the motor to mix the medium and high viscosity liquids in the container. The motor has a soft start function, runs smoothly, and precisely controls the Rotation speed through stepless speed regulation to adapt to the mixing needs of liquids of different viscosity.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. According to the viscosity and other characteristics of the liquid to be stirred, select the appropriate Impeller and install it.
2. Insert the stirring rod through the penetration hole at the bottom of the instrument and adjust it to the appropriate height.
3. Turn on the power supply and set the rough or fine adjustment of Rotation speed through the control panel.
4. Start the equipment and start stirring. Rotation speed can be adjusted in real time as needed during operation.
5. After stirring, turn off the power, remove the Impeller, and clean it.
Notice
● Please make sure to use it at the allowable Ambient Temperature (5~ 40 ℃) and relative humidity (≤ 80%).
● Before use, please confirm that the Power supply voltage (100-240VAC) matches the local power grid.
● Impeller installation must be firm to prevent peeling at high speed swirling/spinning.
When the equipment is running, do not put your hands or foreign objects near the swirl/spin parts.
Pay attention to the overload protection function of the instrument. When there is an abnormal sound prompt or automatic stop, check the load condition.
When cleaning the instrument, please disconnect the power supply and avoid the liquid from washing the case directly.
Do not exceed the maximum processing capacity (20L) and maximum viscosity (10000mPa · s) of the equipment.
When the drill chuck clamps the stirring rod, make sure that the rod diameter is within the allowable range of 0.5 to 10mm.
