Overview
HUXI RWD50E/20030080 LED overhead Stirrer is a laboratory equipment suitable for mixing medium and high viscosity liquids. The product has outstanding performance and is capable of high load, long-term continuous work, and has automatic overload and abnormal protection functions to ensure laboratory safety.
Features
1. LED display, Rotation speed can be coarse and fine-tuned, and Rotation speed can also be adjusted during the operation of the instrument.
2. The motor starts softly and runs smoothly, effectively preventing sample overflow.
3. The closed enclosure effectively prevents liquid from splashing into the instrument, ensuring the safe operation of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the installation position of the stirring rod.
5. Provide a variety of Impellers and brackets to choose from.
Principle
The overhead Stirrer mixes liquids with a motor that drives the Impeller swirl/spin. Its motor has a soft start function to ensure smooth operation. With a stepless speed control system, the user can precisely adjust the Rotation speed to suit the mixing needs of liquids of different viscosities.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. According to the characteristics of the liquid to be stirred, select the appropriate Impeller and install it.
2. Adjust the stirring rod to the appropriate height through the Impeller penetration hole and fix it.
3. Turn on the power supply and set the required Rotation speed through the LED screen and speed control knob.
4. Start the equipment and start stirring.
5. Rotation speed can be adjusted at any time as needed during the mixing process.
6. After stirring, turn off the power, remove the Impeller, and clean it.
Notice
• Please make sure to use it at the allowable Ambient Temperature (5~ 40 ° C) and relative humidity (≤ 80%).
• Before use, please confirm that the Power supply voltage (100-240VAC) matches the local power grid.
• Impeller installation must be secure to prevent loosening or peeling during operation.
• Do not put your hands or Miscellaneous items into the mixing area while the equipment is running.
• The equipment has an overload protection function. If it stops automatically due to overload, please check the load and troubleshoot before restarting.
When cleaning the equipment, please disconnect the power supply and avoid liquids from entering the instrument.
• Do not exceed the nominal maximum Processing capacity (20L) and maximum viscosity (10000mPa · s) of the equipment.
When working continuously for a long time, please pay attention to the operation status of the equipment.
