Overview
HUXI RWD50E/20030060 LED overhead Stirrer is a laboratory equipment suitable for mixing medium and high viscosity liquids. The product is capable of high load, long-term continuous work, outstanding performance, and automatic overload and abnormal protection functions to ensure laboratory safety.
Features
1, LED display, Rotation speed can be coarse and fine adjustment, the instrument operation, can also adjust the Rotation speed.
2. The motor starts softly and runs smoothly, effectively preventing sample overflow.
3. The closed enclosure effectively prevents liquid from splashing into the instrument, ensuring the safe operation of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the installation position of the stirring rod.
5. Impellers and brackets are available.
Principle
The device uses a motor to drive the Impeller swirl/spin to mix liquids. Its motor has a soft start function, which allows for smooth acceleration and prevents sample splashing. With a stepless speed regulation system, users can precisely adjust the stirring Rotation speed as needed to deal with liquids of different viscosity.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. Select the appropriate Impeller according to the application requirements and install it.
2. Adjust the installation position of the stirring rod through the Impeller penetration hole.
3. Turn on the power supply.
4. Set the required Rotation speed (coarse or fine adjustment) through the LED screen and speed control knob.
5. Start the equipment to start stirring, and the Rotation speed can be adjusted as needed during operation.
Notice
● Please ensure that it is used at Permissible Ambient Temperature (5~ 40 ℃) and relative humidity (≤ 80%).
● Note Power supply voltage range is 100-240VAC, rated Frequency is 50/60HZ.
● The device has overload and abnormal protection functions. When the protection is triggered, there will be a sound prompt and automatically stop. You need to check the cause before using it.
● Use non-slip pads to ensure stable placement of the equipment.
● Impeller needs to be firmly fixed with matching wrench chuck.
Do not exceed the equipment's nominal maximum Processing capacity (20L) and maximum viscosity (10000mPa · s).
The diameter range of the drill chuck clamping stirring rod is 0.5 to 10mm, please do not use beyond the range.
