Overview
HUXI LED Stirrer (model: RWD50E/20030095) is a laboratory equipment suitable for mixing medium and high viscosity liquids. The product has outstanding performance and is capable of high load, long-term continuous work, and has automatic protection function for overload and abnormal conditions to ensure laboratory safety. Mainly used in chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology and other fields.
Features
1. LED screen display, Rotation speed can be coarse and fine-tuned, and Rotation speed can also be adjusted during the operation of the instrument.
2. Motor soft start, smooth operation, effectively prevent sample overflow.
3. The closed enclosure effectively prevents liquid from splashing into the instrument, ensuring the safe operation of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the installation position of the stirring rod.
5. Provide a variety of Impellers and brackets to choose from.
Principle
The Stirrer uses a motor to drive the Impeller swirl/spin to mix liquids. Its motor has a soft start function, which allows for smooth acceleration and prevents sample splashing. With a stepless speed regulation system, users can precisely control the stirring Rotation speed as needed to adapt to the mixing needs of liquids of different viscosity.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. Select the appropriate Impeller according to the characteristics of the liquid to be stirred and install it.
2. Fix the Stirrer in place through the bracket, and adjust the height of the stirring rod by using the Impeller penetration hole.
3. Turn on the power supply.
4. Rotation speed coarse or fine adjustment through the control panel, set the required Rotation speed.
5. Start the equipment and start stirring.
6. Rotation speed can be adjusted at any time as needed during the mixing process.
7. After stirring is complete, turn off the power, remove and clean the Impeller.
Notice
• Please make sure to use it at the allowable Ambient Temperature (5~ 40 ° C) and relative humidity (≤ 80%).
• Before use, please confirm that the Power supply voltage (100-240VAC) matches the local power grid.
• Impeller must be firmly installed to prevent loosening or peeling during operation.
• The device has overload and abnormal protection functions. If you hear a sound prompt and automatically stop, please check the load.
• Note that the Equipment Protection Rating is IP42, but it is still necessary to try to avoid a large amount of liquid splashing on the instrument.
• Do not exceed the nominal maximum Processing capacity (20L) and maximum viscosity (10000mPa · s) of the equipment.
• Please clean in time after use and keep the equipment drying.