Overview
HUXI RWD50E/20030033 LED overhead Stirrer is a laboratory equipment suitable for mixing medium and high viscosity liquids. The product has outstanding performance and is capable of high load, long-term continuous work, and has automatic overload and abnormal protection functions to ensure laboratory safety.
Features
1. LED screen display, Rotation speed can be coarse and fine-tuned, and Rotation speed can also be adjusted during the operation of the instrument.
2. Motor soft start, smooth operation, effectively prevent sample overflow.
3. The closed enclosure effectively prevents liquid from splashing into the instrument, ensuring the safe operation of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the position of the stirring rod.
5. Provide a variety of Impellers and brackets to choose from.
Principle
The device drives the Impeller swirl/spin through the motor to mix medium and high viscosity liquids. The motor has a soft start function to ensure smooth operation. The instrument can precisely control the Rotation speed in the range of 30~ 2200rpm through stepless speed regulation to adapt to the mixing needs of liquids of different viscosity.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. Select the appropriate Impeller according to the experimental requirements.
2. Install the stirring rod through the Impeller penetration hole and adjust it to the appropriate position.
3. Use a wrench chuck to secure the Impeller.
4. Turn on the power supply and set the required Rotation speed through the LED screen and speed control knob.
5. Start the equipment and start stirring.
6. Rotation speed can be adjusted as needed during the experiment.
7. After the experiment, turn off the power, remove and clean the Impeller.
Notice
Do not use under conditions exceeding the Permissible Ambient Temperature (5~ 40 ° C) or relative humidity (> 80%).
● Power supply voltage in the range of 100-240VAC.
Processing capacity does not exceed 20L, the maximum viscosity of the liquid does not exceed 10000mPa · s.
● Drill chuck clamping diameter range is 0.5~ 10mm, do not use beyond the range.
● Note that when the instrument is overloaded or abnormal, it will issue a sound prompt and automatically stop. You need to check the cause before using it.
● Use non-slip mats to ensure that the equipment is firmly placed.
Please select the appropriate Impeller type according to the liquid viscosity and mixing requirements.
When cleaning, be careful to prevent liquids from entering the instrument.
