Overview
HUXI LED Top-mounted Stirrer (model: RWD50E/20030047) is a laboratory equipment suitable for mixing medium and high viscosity liquids. It adopts an top-mounted design, which is capable of high load, long-term continuous work, and has automatic protection function for overload and abnormal conditions to ensure experimental safety.
Features
1. Rotation speed can be coarse and fine-tuned, and can also be adjusted during operation.
2. Motor soft start, smooth operation, effectively prevent sample overflow.
3. The closed shell effectively prevents liquid from splashing in, ensuring the safety of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the position of the stirring rod.
5. Provide a variety of Impellers and brackets to choose from.
Principle
The device uses a motor to drive the Impeller swirl/spin to mix liquids. The motor uses soft start technology to ensure smooth operation. Its closed housing and automatic protection function together ensure the safety and stability of the equipment under long-term and high-load work.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. Select the appropriate Impeller according to the viscosity of the liquid to be stirred.
2. Install the stirring rod through the Impeller penetration hole and adjust it to the appropriate position.
3. Use a wrench chuck to secure the Impeller.
4. Turn on the power, through the LED screen and knob Rotation speed coarse and fine adjustment.
5. Start the equipment and start stirring.
6. After the experiment, turn off the power, remove and clean the Impeller.
Notice
● Please ensure that the Ambient Temperature is used within the range of 5~ 40 ° C and the relative humidity ≤ 80%.
● Power supply voltage needs to match 100-240VAC, 50/60HZ.
● Impeller clamping diameter range is 0.5~ 10mm, do not use beyond the range.
The device is equipped with overload and abnormal protection functions. If you hear a sound prompt and stop automatically, please check the load.
Pay attention to the non-slip pad at the bottom of the device to ensure a smooth placement.
Do not allow large amounts of liquid to splash into the instrument.
● The maximum Processing capacity of this product is 20L, which is suitable for liquids with viscosity not exceeding 10000mPa · s.
