Overview
HUXI RWD50E/20030092 LED overhead Stirrer is a laboratory equipment suitable for mixing medium and high viscosity liquids. It adopts an overhead design, which is capable of high load, long-term continuous work, and has automatic protection function for overload and abnormal conditions to ensure experimental safety.
Features
1. LED screen display, Rotation speed can be coarse and fine-tuned, and Rotation speed can also be adjusted during the operation of the instrument.
2. Motor soft start, smooth operation, effectively prevent sample overflow.
3. The closed enclosure effectively prevents liquid from splashing into the instrument, ensuring the safe operation of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the installation position of the stirring rod.
5. Provide a variety of Impellers and brackets to choose from.
Principle
The Stirrer mixes medium to high viscosity liquids with a motor-driven Impeller swirl/spin. The motor has a soft start function to ensure smooth operation and safe operation with a closed enclosure and automatic protection mechanism.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. Select the appropriate Impeller according to the sample characteristics.
2. Install the stirring rod through the Impeller penetration hole and adjust it to the appropriate position.
3. Use a wrench chuck to secure the Impeller.
4. Turn on the power supply and set the required Rotation speed through the LED screen and speed control knob.
5. Start the equipment and start stirring.
6. Rotation speed can be adjusted as needed during operation.
7. After the experiment, turn off the power, remove and clean the Impeller.
Notice
● Please ensure that the Ambient Temperature is used within the allowable range of 5~ 40 ℃ and relative humidity ≤ 80%.
● Power supply voltage (100-240VAC, 50/60HZ) specified in specifications.
● Impeller clamping diameter range is 0.5~ 10mm, do not use beyond the range.
The device has overload and abnormal protection functions. If you hear a sound prompt or the device automatically stops, please check the load.
The device case is IP42 Protection Rating, which can prevent liquid splashing, but it is still necessary to avoid a large amount of liquid splashing.
Do not exceed the limits of maximum Processing capacity (20L) and maximum viscosity (10000mPa · s).
● Please clean in time after use and keep the equipment drying.
● The bottom of the equipment is equipped with a non-slip pad, please place it on a stable countertop for operation.
