Overview
HUXI RWD50E/20030093 LED top-mounted Stirrer is a laboratory equipment suitable for mixing medium and high viscosity liquids. It adopts top-mounted design, which is capable of high load, long-term continuous work, and has automatic protection function for overload and abnormal conditions to ensure experimental safety. Mainly used in chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology and other fields.
Features
1. LED screen display, Rotation speed can be coarse and fine-tuned, and Rotation speed can also be adjusted during the operation of the instrument.
2. Motor soft start, smooth operation, effectively prevent sample overflow.
3. The closed enclosure effectively prevents liquid from splashing into the instrument, ensuring the safe operation of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the installation position of the stirring rod.
5. Provide a variety of Impellers and brackets to choose from.
Principle
The Stirrer uses a motor to drive the stirring rod and blade swirl/spin to mix medium and high viscosity liquids in the container. The motor has a soft start function to ensure smooth operation. The instrument controls the Rotation speed through stepless speed regulation to adapt to the mixing needs of liquids of different viscosity, and automatically stops to provide protection in the event of overload or abnormality.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. Select the appropriate Impeller according to the characteristics of the liquid to be stirred and install it.
2. Install the stirring rod through the penetration hole at the bottom of the instrument and adjust it to the appropriate height.
3. Turn on the power supply.
4. Rotation speed coarse adjustment and fine adjustment setting through LED screen and knob.
5. Start the equipment to start stirring, and the Rotation speed can be adjusted as needed during operation.
6. Turn off the power after stirring, remove the Impeller and clean it.
Notice
• Please use under Permissible Ambient Temperature (5~ 40 ℃) and relative humidity (≤ 80%).
• Power supply voltage in 100-240VAC range.
Processing capacity does not exceed 20L, the maximum viscosity of the liquid does not exceed 10000mPa · s.
• Before use, please confirm that the Impeller is firmly installed to prevent peeling.
• Pay attention to the sound prompt when the instrument is overloaded or abnormal, and wait for it to stop automatically.
• Keep the instrument case closed to prevent liquids from splashing inside.
• Do not perform operations that may touch moving parts while the instrument is running.
• Please disconnect the power supply when cleaning.
