Overview
HUXI RWD50E/20030081 LED overhead Stirrer is a laboratory equipment suitable for mixing medium and high viscosity liquids. It adopts an overhead design, which is capable of high load, long-term continuous work, and has automatic protection function for overload and abnormal conditions to ensure experimental safety.
Features
1. LED screen display, Rotation speed can be coarse and fine-tuned, and the Rotation speed can also be adjusted during the operation of the instrument.
2. Motor soft start, smooth operation, effectively prevent sample overflow.
3. The closed enclosure effectively prevents liquids from splashing into the instrument, ensuring the safety of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the position of the stirring rod.
5. Provide a variety of Impellers and brackets to meet different experimental needs.
Principle
The device drives the Impeller swirl/spin through a motor to mix medium and high viscosity liquids. Its motor has a soft start function for smooth acceleration to prevent sample splashing. The instrument precisely controls the Rotation speed of the Impeller through a stepless speed regulation system to adapt to the mixing needs of liquids of different viscosity, and automatically stops operation to provide protection in case of overload or abnormality.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating IP42
Steps
1. Select the appropriate Impeller according to the experimental requirements and install it.
2. Adjust the stirring rod to the appropriate position through the Impeller penetration hole.
3. Turn on the power supply.
4. Set the required Rotation speed (coarse and fine adjustment) through the LED screen and speed control knob.
5. Start the equipment to stir.
6. Rotation speed can be adjusted in real time as needed during the experiment.
7. After the experiment, turn off the power, remove the Impeller, and clean it.
Notice
• Power supply voltage in 100-240VAC range. Frequency 50/60Hz.
• The instrument should be used under the conditions of Ambient Temperature 5~ 40 ℃ and relative humidity ≤ 80%.
• Impeller clamping diameter range is 0.5~ 10mm, please do not use beyond the range.
• The device has an overload protection function. When it sounds and stops automatically, please check the load.
• Pay attention to the non-slip pad at the bottom of the instrument to ensure that the equipment is placed smoothly.
• Impeller fixing requires a special wrench chuck to ensure firm installation.
Do not allow liquids to splash into the enclosure of the instrument.
• The maximum Processing capacity of this product is 20L, which is suitable for liquids with a maximum viscosity of 10000mPa · s. Please do not use it beyond the limit.
