Overview
HUXI LED Top-mounted Stirrer (model: RWD50E/20030082) is a laboratory equipment suitable for mixing medium and high viscosity liquids. It is designed for high load, long continuous operation, outstanding performance, and automatic overload and abnormal protection to ensure laboratory safety.
Features
1. LED screen display, Rotation speed can be coarse and fine-tuned, and Rotation speed can also be adjusted during the operation of the instrument.
2. Motor soft start, smooth operation, effectively prevent sample overflow.
3. The closed enclosure effectively prevents liquid from splashing into the instrument, ensuring the safe operation of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the position of the stirring rod.
5. Provide a variety of Impellers and brackets to choose from.
Principle
The device drives the Impeller swirl/spin through the motor to mix the liquid. The motor has a soft start function, which can accelerate smoothly and prevent the sample from splashing. The device adopts a stepless speed regulation mode, and the user can precisely adjust the stirring speed according to the experimental needs to cope with the mixing task of liquids with different viscosity.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. According to the viscosity and characteristics of the liquid to be mixed, select the appropriate Impeller and install it.
2. Insert and fix the stirring rod through the penetration hole at the bottom of the instrument.
3. Turn on the power and set the required Rotation speed through the coarse and fine adjustment knobs on the control panel.
4. Start the device, the motor will soft start to the set Rotation speed.
5. Rotation speed can be adjusted at any time as needed during operation.
6. After the experiment, turn off the power, remove and clean the Impeller.
Notice
Do not use under conditions exceeding the Permissible Ambient Temperature (5~ 40 ° C) or relative humidity (80%).
● Power supply voltage in the range of 100-240VAC.
● Impeller clamping diameter should be within the range of 0.5~ 10mm.
● The device has overload protection. When triggered, there will be a sound prompt and automatically stop. You need to check the cause before using it.
Pay attention to the non-slip pad at the bottom of the device to ensure a smooth placement.
Processing capacity is up to 20L, the maximum applicable liquid viscosity is 10000mPa · s, do not exceed the limit.
