Overview
HUXI RWD100E/20030042 LED overhead Stirrer is a laboratory equipment suitable for mixing medium and high viscosity liquids. It adopts LED screen display, has soft start and overload protection functions, and is capable of high load and long-term continuous work. It is mainly used in chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology and other fields.
Features
1. LED screen display, Rotation speed can be coarse and fine-tuned, and Rotation speed can also be adjusted during operation.
2. Motor soft start, smooth operation, effectively prevent sample overflow.
3. The closed enclosure effectively prevents liquids from splashing into the instrument, ensuring the safety of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the position of the stirring rod.
5. Provide a variety of Impellers and brackets to choose from.
Principle
The device mixes medium to high viscosity liquids by driving the Impeller swirl/spin motor. The motor has a soft start function to ensure smooth operation, and an automatic protection function for overload and abnormal conditions to ensure the safe operation of the laboratory.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. Select the appropriate Impeller according to the mixing requirements.
2. Install the stirring rod through the Impeller penetration hole and adjust it to the appropriate position.
3. Use a wrench chuck to secure the Impeller.
4. Turn on the power, through the LED screen and knob Rotation speed coarse or fine adjustment settings.
5. Start the equipment and start the mixing operation.
Notice
● Please make sure to use it at the allowable Ambient Temperature (5~ 40 ℃) and relative humidity (≤ 80%).
● Note Power supply voltage range is 100-240VAC, rated Frequency is 50/60HZ.
● Impeller clamping diameter range is 0.5~ 10mm, do not use beyond the range.
● The device has overload and abnormal protection functions. When triggered, there will be a sound prompt and automatically stop. Please check the cause before using it.
The instrument housing is a closed design, but care needs to be taken to prevent large amounts of liquid from splashing in.
Please select the appropriate Impeller and working parameters according to the viscosity (up to 50000mPa · s) and capacity (up to 40L) of the handling liquid.