Overview
HUXI LED overhead Stirrer (model: RWD100E/20030043) is a laboratory equipment suitable for mixing medium and high viscosity liquids. The product is capable of high load, long-term continuous work, outstanding performance, and automatic protection for overload and abnormal conditions to ensure laboratory safety.
Features
1. LED screen display, Rotation speed can be coarse and fine-tuned, and Rotation speed can also be adjusted during the operation of the instrument.
2. Motor soft start, smooth operation, effectively prevent sample overflow.
3. The closed enclosure effectively prevents liquid from splashing into the instrument, ensuring the safe operation of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the position of the stirring rod.
5. Provide a variety of Impellers and brackets to choose from.
Principle
The device uses a motor to drive the Impeller swirl/spin to mix medium and high viscosity liquids. With stepless speed regulation, the Rotation speed can be precisely controlled according to the experimental needs to achieve a gentle or strong stirring effect. Its closed housing and motor protection mechanism ensure the safety and stability of the operation process.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. Select the appropriate Impeller according to the experimental requirements and install it.
2. Insert and fix the stirring rod through the penetrating hole on the instrument.
3. Turn on the power and set the required Rotation speed through the LED screen and knob.
4. Start the equipment and start stirring.
5. After the experiment, turn off the power, remove and clean the Impeller.
Notice
• Please make sure to use it at the allowable Ambient Temperature (5~ 40 ° C) and relative humidity (≤ 80%).
• Before use, please confirm that the Power supply voltage (100-240VAC) matches the local power grid.
• Pay attention to the clamping diameter range of the Impeller (0.5~ 10mm) to ensure correct installation.
• The device has an overload protection function. If you hear a sound prompt and stop automatically, please check the load.
• Do not forcibly move or touch the stirring parts while the instrument is running to avoid danger.
• Keep the instrument case clean to prevent liquids from seeping in.
• Please select the appropriate Impeller and Rotation speed according to the viscosity (up to 50000mPa · s) and capacity (up to 40L) of the liquid to be treated.
