Overview
HUXI LED overhead Stirrer (model: RWD100E/20030040) is a laboratory equipment suitable for mixing medium and high viscosity liquids. The product is capable of high load, long continuous operation, outstanding performance, and automatic protection for overload and abnormal conditions to ensure laboratory safety.
Features
1. LED display, Rotation speed can be coarse and fine-tuned, and Rotation speed can also be adjusted during the operation of the instrument.
2. The motor starts softly and runs smoothly, effectively preventing sample overflow.
3. The closed enclosure effectively prevents liquid from splashing into the instrument, ensuring the safe operation of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the installation position of the stirring rod.
5. Provide a variety of Impellers and brackets to choose from.
Principle
The device drives the Impeller swirl/spin through a motor to mix medium and high viscosity liquids. The motor uses soft start technology to run smoothly, and the stirring speed is precisely controlled by stepless speed regulation to adapt to experiments with different viscosity and mixing requirements.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. Select the appropriate Impeller according to the experimental requirements and install it.
2. Adjust the stirring rod to the appropriate position through the Impeller penetration hole.
3. Turn on the power supply and adjust the Rotation speed coarsely and finely through the LED screen and knob.
4. Start the equipment and start stirring.
5. After the experiment, turn off the power, remove and clean the Impeller.
Notice
Do not use under conditions exceeding the Permissible Ambient Temperature (5~ 40 ° C) and relative humidity (80%).
● Power supply voltage is within 100-240VAC range before use.
● Impeller clamping diameter range is 0.5~ 10mm, do not use beyond the range.
The device has overload and abnormal protection functions. If the trigger protection automatically stops, please check the load before starting.
Please ensure that the equipment is placed on a smooth surface and fixed with a non-slip pad to prevent slippage.
When cleaning, do not allow liquids to enter the equipment.
● Please select the appropriate Impeller and Rotation speed according to the liquid viscosity (maximum 50000mPa · s) and Processing capacity (maximum 40L).
