Overview
HUXI RWD100E/20030051 LED overhead Stirrer is a laboratory equipment suitable for mixing medium and high viscosity liquids. The product has outstanding performance and is capable of high load, long continuous operation, and automatic overload and abnormal protection functions to ensure experimental safety.
Features
1. LED display, Rotation speed can be coarse and fine-tuned, and Rotation speed can also be adjusted during the operation of the instrument.
2. The motor starts softly and runs smoothly, effectively preventing sample overflow.
3. The closed enclosure effectively prevents liquid from splashing into the instrument, ensuring the safe operation of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the position of the stirring rod.
5. Provide a variety of Impellers and brackets to choose from.
Principle
The motor drives the Impeller swirl/spin to mix medium to high viscosity liquids. The enclosed housing and soft start design ensure smooth and safe operation, while the through hole design facilitates the installation and height adjustment of the stirring rod.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. Select the appropriate Impeller according to the sample characteristics and install it.
2. Adjust the stirring rod to the appropriate position through the Impeller penetration hole and fix it.
3. Turn on the power supply and set the required Rotation speed through the LED screen and speed control knob.
4. Start the equipment, and the Rotation speed can be finely adjusted according to the needs during operation.
Notice
• Please make sure to use it at the allowable Ambient Temperature (5~ 40 ° C) and relative humidity (≤ 80%).
• Note Power supply voltage range is 100-240VAC, rated Frequency is 50/60HZ.
• The equipment has overload and abnormal protection functions. In case of failure, it will issue a sound prompt and automatically stop. Please check the cause in time.
• Use non-slip pads to ensure stable placement of the equipment.
• Impeller clamping diameter range is 0.5~ 10mm, please do not use beyond the range.
• The maximum viscosity of the processing liquid does not exceed 50000mPa · s, and the maximum stirring Processing capacity is 40L.
