Overview
HUXI RWD100E/20030052 LED overhead Stirrer is a laboratory equipment suitable for mixing medium and high viscosity liquids. It adopts an overhead design, which is capable of high load, long-term continuous work, and has automatic protection function for overload and abnormal conditions to ensure experimental safety. The product is mainly used in chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology and other fields.
Features
1. LED screen display, Rotation speed can be coarse and fine-tuned, and Rotation speed can also be adjusted during the operation of the instrument.
2. Motor soft start, smooth operation, effectively prevent sample overflow.
3. The closed enclosure effectively prevents liquid from splashing into the instrument, ensuring the safe operation of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the installation position of the stirring rod.
5. Provide a variety of Impellers and brackets to choose from.
Principle
The Stirrer uses a motor to drive the Impeller swirl/spin to mix liquids. Its motor has a soft start function, which allows for smooth acceleration and prevents sample splashing. With a stepless speed regulation system, users can precisely adjust the stirring speed as needed to adapt to the mixing needs of liquids of different viscosities. The closed enclosure and the automatic protection mechanism work together to ensure the safety and stability of the equipment under long-term high-load operation.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. Select the appropriate Impeller according to the mixing requirements.
2. Install the stirring rod through the penetration hole on the top of the instrument and adjust it to the appropriate position.
3. Use a wrench chuck to secure the Impeller.
4. Turn on the power supply.
5. Rotation speed coarse or fine adjustment through the control panel, set the required Rotation speed.
6. Start the equipment and start stirring.
7. Rotation speed can be adjusted at any time as needed during the mixing process.
8. After use, turn off the power and clean the equipment.
Notice
• Please use under Permissible Ambient Temperature (5~ 40 ℃) and relative humidity (≤ 80%).
• Power supply voltage in 100-240VAC range.
• Impeller clamping diameter range is 0.5~ 10mm, please do not use beyond the range.
• The device has overload and abnormal protection functions. If you hear a sound prompt or the device automatically stops, please check the load.
• Pay attention to the non-slip pad at the bottom of the device to ensure smooth placement.
• Avoid liquid splashing into the inside of the instrument.
• Do not exceed the maximum Processing capacity (40L) and maximum viscosity (50000mPa · s).
• Please clean it promptly after use.
