Overview
HUXI LED Top-mounted Stirrer (model: RWD100E/20030007) is a laboratory equipment suitable for mixing medium and high viscosity liquids. It adopts an top-mounted design, which is capable of high load, long-term continuous work, and has automatic protection function for overload and abnormal conditions to ensure experimental safety.
Features
1. LED screen display, Rotation speed can be coarse and fine-tuned, and Rotation speed can also be adjusted during the operation of the instrument.
2. Motor soft start, smooth operation, effectively prevent sample overflow.
3. The closed enclosure effectively prevents liquid from splashing into the instrument, ensuring the safe operation of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the position of the stirring rod.
5. Provide a variety of Impellers and brackets to choose from.
Principle
The device drives the stirring rod and the blade swirl/spin through the motor to mix the medium and high viscosity liquids in the container. The motor has a soft start function, which can accelerate smoothly, and precisely controls the Rotation speed through stepless speed regulation to adapt to the mixing needs of different viscosity.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. Select the appropriate Impeller according to the sample characteristics and install it.
2. Adjust the stirring rod to the appropriate height through the Impeller penetration hole and fix it.
3. Turn on the power and set the required Rotation speed through the LED screen and knob.
4. Start the equipment, and the Rotation speed can be finely adjusted according to the needs during operation.
5. Turn off the power after use and clean the equipment.
Notice
● Please make sure to use it at the allowable Ambient Temperature (5~ 40 ℃) and relative humidity (≤ 80%).
● Note Power supply voltage range is 100-240VAC, rated Frequency is 50/60HZ.
The device has an overload protection function. If you hear a sound prompt and stop automatically, please check the load.
● Use non-slip pads to ensure stable placement of the equipment.
● Impeller fixation requires a special wrench chuck to ensure firm clamping.
Do not exceed the equipment's nominal maximum Processing capacity (40L) and maximum viscosity (50000mPa · s).
